XT-XINTE XQ-468B Multifunctional network measuring instrument Network cable telephone monitoring tester
XQ-468B Multifunctional network measuring instrument Network cable telephone monitoring tester

XQ-468B Multifunctional network measuring instrument Network cable telephone monitoring tester Item NO: eb834

US$ 2.47 (15% Off)
US$ 2.90 Save US$ 0.44
Shipping Cost:
Estimate Shipping Cost
Quantity:
  • Test cable: RJ11, RJ45, BNC
  • Power supply: DC 9V laminated battery
  • Power consumption: 25MA
  • Volume: 118 * 31 * 123mm
Specifications
Product Name XQ-468B Multifunctional network measuring instrument Network cable telephone monitoring tester
Item NO eb834
Weight 0.3300 Kg
Category Consumer Electronics > Computer Cable and Adapter
Brand XT-XINTE
Creation time 2017-10-17

Detail
Can be achieved on the telephone line, cable line and fault test.

BNC line can be achieved on the line and fault test.
Switch ON for normal test speed, "S" for slow test speed.

Twisted pair test:

Turn on the power, insert the cable plug into the main tester and the remote tester,
The host lights light from 1 to G in sequence, the following example:
Main tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-2-3-4-5-6-7-8-G (RJ45)
  
1-2-3-4-5-6 ------ (RJ12)
  
1-2-3-4 ---------- (RJ11)
If the wiring is not normal, according to the following circumstances:
1, when there is a cable, such as Line 3 circuit, then the main test and remote test side 3 lights are not bright.
2, when there are several lines nowhere, then a few lines are not bright, when the cable is less than 2 lines connected, the lights are not bright.
3, when the two lines out of order, such as 2,4 lines out of order, the display is as follows:
Main tester unchanged: 1-2-3-4-5-6-7-8-G
The remote test end is: 1-4-3-2-5-6-7-8-G
4, when the network cable has two short circuit, the main tester does not display, and the remote test side shows the two short-circuit lights are slightly bright, if more than three (including 3) short circuit when all the short-circuit The line number of lights are not bright.

If the patch panel and wall module, you need two matching jumper (such as 110P4-RJ45) led to the tester.


Coaxial cable test: If the cable is good, then the two ends of the BNC lamp at the same time flashing green light.


BNC line test description:
1, toggle the dial switch, select fast or slow block, power indicator light.
2, the BNC test line at the end of the main test BNC head, the other end access to the remote test side BNC head, and the main test indicator and remote test side lights 1 to 2 cut a flash and cycle.
3, if broken, out of order short circuit as shown in the test method.
4, the test is completed, turn off the power, power indicator light off

Technical indicators:

Test cable: RJ11, RJ45, BNC
Power supply: DC 9V laminated battery
Power consumption: 25MA

Volume: 118 * 31 * 123mm


No related record found

You May Also Like