VONETS VM300 802.11b/g/n Wi-Fi Module Board for DIY Wi-Fi Repeater Router usb wifi module

• Clocked of main chip：580MHz
• 32Mb SDRAM,can be extended 64Mb; 4Mb SPI Flash, can be extended 8Mb(Byte).
• WiFi working frequency:2.4GHz，2T2R dual antenna，300Mbps transmission rate.
• Support 1-14WiFichannels.
• Rated Power< 3W.
• Output power of Module RF :13.5dbm--14.5dbm.
• Adopt the original creation D/A temperature compensated auto frequency control technology（TAFC）,make sure the lasting stability to ensure that the WiFi signal is not dropped.
• Support 802.11b/g/n mode.
• Operating ambient temperature：-25℃ ---- 55℃

• Two software-controllable operating modes:routing mode,Bridge+Repeater mode.
• Support intelligent transparent bridge mode, also support AP Client and AP Station.
• Support 3G/4G Module(3G USB Dongle)
• Independent hardware data processing,  does not consume host system resources, without installing any drivers
• In bridge mode, fool configuration to facilitate the secondary development implanted into other host systems.
• Built-in WEB configuration services, available configure module parameters through the web.
• Built-in SOCKET monitoring services, used to control two GPIO (1.5A) output, nine kinds of GPIO control state to facilitate the secondary development and function expansion.
• Support VDNS technology, in bridge mode, can be configured via logging on the domain login page, solve the problem that configure and secondary development.
• Two external antenna RF Female.
• Support for online firmware upgrade.
• Support open-wrt.