Product Name | SPEKTRUM 8-way Ar8000 Dsmx Dsm2 Receiver Dsmx Satellite Dx6i Receiver for DIY FPV Racing Drone Quadcopter |
Item NO. | F42106 |
Weight | 0.057 kg = 0.1257 lb = 2.0106 oz |
Category | DIY RC Drone Accessories > Receiver |
Brand | SPCMAKER |
Creation Time | 2020-11-12 |
SPEKTRUM 8-way ar8000 dsmx dsm2 receiver dsmx satellite dx6i receiver for DIY FPV Racing Drone Quadcopter
Channel: 8
Modulation: dsmx
Frequency band: 2.4GHz
Dimensions: (W x L x H): 32.3 x 34.3 x 11.4 mm with hard shell
Weight: 9.4g
Voltage range: 3.5v-9.6v
Method of frequency matching:
1. Insert the counter frequency plug into the receiver bind channel, and insert the battery (or turn on the power supply) into any
other unused channel. At this time, the LED lights of the internal receiver and the external receiver will flash.
2. Set the status of each channel of the transmitter (it is the protection status in case of out of control, in general, set the lowest throttle),
press and hold the code matching key (light) on the remote control, and turn on the power supply of the transmitter
(the preset full channel protection function is set here)
3. At this time, the LED light of the internal receiver changes from fast flashing to slow flashing. In a few seconds,
the LED light of the receiver and the external receiver turns on normally. When the LED light is on normally,
it means that the counter frequency is completed
4. Remove the code pair line of bind interface and power on each channel to operate normally.
The new receiver only needs frequency alignment once. After the frequency alignment is successful,
the frequency alignment line is removed when it is used.
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found