Home>DIY RC Drone Accessories>DIY RC Drone Kit>S600 DIY FPV Drone 4 axis Quadcopter Kit Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX
S600 DIY FPV Drone 4 axis Quadcopter Kit Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX

S600 DIY FPV Drone 4 axis Quadcopter Kit Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX Item NO.: F19457-D

Write a Review
US$ 203.60
US$ 239.53 Save US$ 35.93 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name S600 DIY FPV Drone 4 axis Quadcopter Kit Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX
Item NO. F19457-D
Weight 2.816 kg = 6.2082 lb = 99.3315 oz
Category DIY RC Drone Accessories > DIY RC Drone Kit
Brand XT-XINTE
Creation Time 2017-07-25

DIY RC Drone Full Kit S600 Frame kit PIX 2.4.8 Flight Control with  FS-i6 6CH Transmitter 40A ESC 700KV Motor GPS7M

 

 

Product Listing :

 

S600 Super Hard Arm 4-Axis Rack Quadcopter Frame Kit with Landing Gear Skid *1

JMT 40A Brushless ESC Speed Controller *4

HYD 3508 700KV 198W Disc Motor *4

Three-hole High Quality Carbon Fiber 15x5.5 1555 Propeller CW CCW Prop * 2pairs

PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD*1

UBLOX NEO-7M 7M GPS Module with Compass *1

CNC GPS Anti-interference Antenna Mount Holder Stent Case*1

8 Channel PPM Encoder *1

APM2.6 2.5 2.52 Power Module Current Module APM with 5.3V DC BEC *1

Thick Gold Plated 3.5mm Bullet Connector ( banana plug ) *1

Hook and & Loop Fastening Tape *1

Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter iA6 Receiver Mode 2/1 Radio System *1

 

 

 

 

Frame Kit Specifications:

 
Wheelbase:  600mm 
Tripod height: 250mm
 
Maximum available paddle: 15 inch
 
Weight:  860g
 
Upper and lower center plate middle height:  36mm
 

 

Pix 2.4.8 Spacifications :

 

 

Note:

Open source products, once sold, no return, if quality problems, Please return for repair . Does not provide one to one support. Buy carefully!

If you are using a PWM receiver, please ready a PWM / PPM converter.

 

 

Description:
- The board integrates with PX4FMU+PX4IO
- Pixhawk is with new 32 bit chip and sensor technology

Features:
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;

Processor:
- 32 bit 2M flash memory STM32F427  Cortex M4, with hardware floating point processing unit
- Main frequency: 256K, 168MHZ RAM
- 32 bit STM32F103 backup co processor

Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis  14 bit accelerometer /magnetometer
- MPU6000 6 axis accelerometer / magnetometer
- MS5611 high precision barometer

No related record found