Home>DIY RC Drone Accessories>DIY RC Drone Kit>QWinOut three225 Airframe F4 Betaflight 1200TVL ND filter Camera 2306-2400kv Motors Dshot600 ESC Propellers 1500MAH Battery&Charge Flysky FS I6 6CH TX&Receiver DIY Drone Kit
QWinOut three225 Airframe F4 Betaflight 1200TVL ND filter Camera 2306-2400kv Motors Dshot600 ESC Propellers 1500MAH Battery&Charge Flysky FS I6 6CH TX&Receiver DIY Drone Kit

QWinOut three225 Airframe F4 Betaflight 1200TVL ND filter Camera 2306-2400kv Motors Dshot600 ESC Propellers 1500MAH Battery&Charge Flysky FS I6 6CH TX&Receiver DIY Drone Kit Item NO.: F37491-E F37491-F

Write a Review
US$ 157.30
US$ 185.06 Save US$ 27.76 (15% Off)
Version
Basic Version With FPV GogglesCarry bag
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name QWinOut three225 Airframe F4 Betaflight 1200TVL ND filter Camera 2306-2400kv Motors Dshot600 ESC Propellers 1500MAH Battery&Charge Flysky FS I6 6CH TX&Receiver DIY Drone Kit
Item NO. F37491-E F37491-F
Weight 3 kg = 6.6139 lb = 105.8219 oz
Category DIY RC Drone Accessories > DIY RC Drone Kit
Brand QWinOut
Creation Time 2020-05-09

QWinOut three225 225mm Carbon Fiber Airframe with F4 Betaflight 5V 8V 3A Dual BEC OSD FC 1200TVL ND filter Camera 2306-2400kv Motors 4-in-1 BLHeli-S Dshot600 ESC 5144 Propellers 11.1V 1500MAH 40C Battery&Charge Flysky i6 FS I6 6CH TX&Receiver DIY Drone Kit ARF

Flight control:
Model: F4
Main control chip: STM32F405RGT6
Gyroscope: MPU6000
Barometer: none (reservation pad)
Input voltage: 2-6S
I2C interface: support
BEC-1: 5V / 2A (internal power supply, receiver, LED, BUZZER, etc.)
BEC-2: 8V / 3A (camera and picture transmission power supply)
Serial control port: three channels (UART1, UART3, UART6)
Flight control firmware: Betaflight
Conversion of hole position and damping ball hole position: 30.5 * 30.5mm, φ4mm
Flight control size: 36 * 36mm
Weight: 6.9g

Paddle:
Product name: 5144
Size: 5.1 * 4.4 inch 3 blades
Pitch: 4.4 inches
Wheel size: 5 mm
Weight: 4.68g
Material: PC
Center thickness: 7 mm
Blade diameter: 129.3 mm
Maximum blade width: 15.43mm

Motor:
2306 2400KV
No-load current (11.1V): 1.6A
Motor resistance: 44mΩ (reference)
Maximum continuous current: 50A
Maximum continuous power: 750 watts
Weight: 32g
Outer diameter: 28 mm
Body length: 17.6 mm

ESC:
Project Name: 35A BLheli_S 2-6S 4 in 1 ESC
Con. Current: 35A peak
Current (10s): 40A
LBEC: No
SBEC: No
Lipo: 3-6S
Programming: yes
Weight: 13g
Dimensions (PCB): 36x36mm
Hole size: 30.5x30.5mm

VTX:
Input voltage: DC 7V-27V (2-6S)
Output voltage: DC 5V 2A
Power switching: five gears 25MW, 200MW, 400MW, 800MW, 1000MW
Signal channels: 40
Frequency switching: manual button / IRC OSD (simultaneous support)
Antenna interface: MMCX (distribution to SMA extension cable)
Dimensions: 36MM * 36MM
Hole distance: 30.5 * 30.5MM, M3

Camera:
Lens: 2.1mm + ND filter
Image sensor: 1 / 1.8 "inch starlight HDR sensor
Horizontal resolution: 1200TVL
FOV: 180 degrees
Minimum delay: 8 ms
TV system: NTSC and PAL (can be changed)
Image: 16: 9 and 4: 3 (can be changed)
Video output: CVBS
Language: ENG / FRANCE / RUS / SPA / PU / KOREA / China / Japan
Day / Night: Auto / Color / Black and White / External
Size: 19mm * 19mm * 19mm
Wide power input: DC 5-40V

Battery & Charger:
11.1V 1500MAH 40C XT60 Plug Li Battery
IMAXRC B3 pro 2s 3s Battery Charger

Radio Transmitter & Receiver:
FS-i6 6CH 2.4G AFHDS 2A LCD Remote Controller Radio System
Fli14+14CH Mini Receiver Compatible for Flysky AFHDS-2A w/ PA OSD RSSI Output 

FPV Goggles (Optional):
QWinOut Mini FPV Goggles 3 inch 480 x 320 Display Double Antenna Reception 5.8G 40CH Built-in Battery 

Carry Bag (Optional):
QwinOut Universal EVA Nylon Remote Controller Storage Bag Portable Case for Jumper T16 PRO / AT9S / AT10 / WFLY 7 9 FUTABA / FLYSKY / FRSKY X9D Flysky Radio Controller

Precautions:
1 Please do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to be unable to charge and become obsolete). After the battery is fully charged, it can not be charged for a long time.
2. Without understanding flight control and remote control, please do not modify any parameters and wiring without authorization.
3. Turn on the remote control before applying power to the aircraft, and unplug the power after the flight, and then turn off the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. When there is no wind, it can be flown in an open outdoor area. Avoid flying in crowds and surrounding areas with interference.
5. The product is unassembled / welded parts. If you have any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to respond to related questions. If customers need to assemble, please contact us at any time, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
6. This product is not a toy and is not suitable for children under 14 years of age.
7. Please read the instructions carefully before any use, if you are a beginner, it is recommended to be assisted by experienced adults
8. Do n’t fly big and high because the plane is small.
9. Novices should be careful not to take the plane with their hands or let children take it to avoid being scratched when the plane is turning.

10. Please turn off the start switch in time when the aircraft falls on the wall or hits other objects during flight. Otherwise, it may cause damage to the flight control motor, etc.


No related record found