Home>DIY RC Drone Accessories>Flight Control>Matek New Mateksys Flight Controller F765-WING F765 Wing for RC FPV Racing Drone Fixed Wings Support PIX INAV Dual Camera Cam I2C PM
Matek New Mateksys Flight Controller F765-WING F765 Wing for RC FPV Racing Drone Fixed Wings Support PIX INAV Dual Camera Cam I2C PM

Matek New Mateksys Flight Controller F765-WING F765 Wing for RC FPV Racing Drone Fixed Wings Support PIX INAV Dual Camera Cam I2C PM Item NO.: F42787

Write a Review
US$ 68.53
US$ 80.62 Save US$ 12.09 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name Matek New Mateksys Flight Controller F765-WING F765 Wing for RC FPV Racing Drone Fixed Wings Support PIX INAV Dual Camera Cam I2C PM
Item NO. F42787
Weight 0.02 kg = 0.0441 lb = 0.7055 oz
Category DIY RC Drone Accessories > Flight Control
Brand MWZ
Creation Time 2021-01-12

Matek New Mateksys Flight Controller F765-WING F765 Wing for RC FPV Racing Drone Fixed Wings Support PIX INAV Dual Camera Cam I2C PM


FLIGHT CONTROLLER F765-WING:
STM32F765VI, MPU6000 & ICM20602, BMP280, OSD, 7x UARTs, 2x I2C, 12x PWM outputs, 3x BEC, Camera switcher.
FC Specifications
 
MCU: STM32F765VIT6, 216MHz , 512KB RAM, 2MB Flash
IMU: MPU6000 (SPI1) & ICM20602 (SPI3)
Baro: BMP280 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card slot (SDIO)
7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
1x Softserial1_Tx (INAV)
12x PWM outputs (S1~S10 support Dshot)
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
2x I2C
1x SPI4 breakout
 
Switchable Dual Camera Inputs
Switchable 5V/9V(12V) for Camera/VTX
High-precision Current Sense
ADC VB2 voltage divider: 1K:10K
ADC AirSpeed voltage divider: 10K:10K
TR/SA VTX control: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
Analog Airspeed sensor: Yes
Digital Airspeed sensor: Yes
FC Firmware
 
INAV Target: MATEKF765
ArduPilot(ChiBiOS)  Target: MATEKF765-WING
PDB
 
Input voltage range: 9~36V (3~6S LiPo) w/TVS protection
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
Current Senor: 132A,  3.3V ADC  (Scale 250 in INAV,  40 A/V in ArduPilot)
BEC 5V output
 
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output
 
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
BEC Vx output
 
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 8 Amps, Max.10A
BEC 3.3V output
 
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 200mA
Physical
 
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 54 x 36 x 13 mm
Weight: 26g



No related record found