Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat

Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat Item NO: F27384-F27385

US$ 109.00
Mode:
Mode1 Right Throttle Mode2 Left Throttle
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Estimate Shipping Cost
  • Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat
Product Name Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat
Item NO F27384-F27385
Weight 0.4000 kg = 0.8818 lb = 14.1096 oz
Category DIY RC Drone Kit / RC Drone Accessories > Remote Control
Brand Jumper
Creation time 2019-01-23

Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat

Radio Specification: 
Brand Name: Jumper 
Module: T12 Plus 
Radio MCU: STM32F205VET6 ( 512kb ) 
Working voltage: DC5 - DC9V 
( factory with 4 x AA battery box, 2s Lipo recommended, batteries not included ) 
Firmware: JumperTX ( an open source Firmware set based on the OpenTX Project ) 
Channels: up to 16 channel output 
Display: 1.7 - inch LCD display, 128 x 64 resolution 
Gimbal Type: HALL Sensor 
JR / FrSKY compatible module bay on rear side 
Upgrade method: USB online upgrade 
Simulator mode: 3.5mm standard ppm output or USB HID 
Voice support: YES 
JP4 - in - 1 RF Module Specification: 
Working Voltage: 6 - 9V 
Working Vurrent: 100ma and less 
Operating Frequency: 2.4G ISM band 
RF Power: +22DBM 
Main Control Chip: STM32F103CBT6 ( 128K ROM, 20K RAM ) 
Module bay compatibility: FRSky, Jr and other dimensions: 64 x 49 x 33 ( without antenna ) 
Net Weight: 42g ( including antenna ) 
Software Compatibility: Suitable for radios using OpenTX or er9x / ersky9x 
Firmware updatable: Yes, via USB. 
Features: 
Open source multi - protocol firmware, Based on Open TX 
JR / FrSKY compatible module bay on rear side. 
USB online firmware upgrade 
Ultra-low power consumption, longer battery life 
Up to 16 channels of output ( depending on the receiver ) 
Open Source Firmware, all channels are fully programmable 
Wide voltage input ( 2s lipo recommended ) 
Multilingual menu 
Vibration reminder function 
Support telemetry ( depending on the receiver ) 
Carry Case included 
Crossfire CSRF Compatible: Yes 
LUA Script support: Yes


No related record found

You May Also Like