Home>RC Toy Drone>Hot sale brand>JMT T180 4 Inch 3S FPV Racing Drone HD Camera Baby Turtle 800TVL BNF Betaflight F4 Pro V2 OSD Brushless RC Quadcopter for FRSKY D8
JMT T180 4 Inch 3S FPV Racing Drone HD Camera Baby Turtle 800TVL BNF Betaflight F4 Pro V2 OSD Brushless RC Quadcopter for FRSKY D8

JMT T180 4 Inch 3S FPV Racing Drone HD Camera Baby Turtle 800TVL BNF Betaflight F4 Pro V2 OSD Brushless RC Quadcopter for FRSKY D8 Item NO.: F21890-AJ/AH/AI/AG/AF/AE/AD/AC/AB/AA F21890-Z F21890-Y

Write a Review
US$ 131.26
US$ 154.42 Save US$ 23.16 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name JMT T180 4 Inch 3S FPV Racing Drone HD Camera Baby Turtle 800TVL BNF Betaflight F4 Pro V2 OSD Brushless RC Quadcopter for FRSKY D8
Item NO. F21890-AJ/AH/AI/AG/AF/AE/AD/AC/AB/AA F21890-Z F21890-Y
Weight 1.99 kg = 4.3872 lb = 70.1952 oz
Category RC Toy Drone > Hot sale brand
Brand JMT
Creation Time 2019-12-30

JMT T180 4 Inch 3S FPV Racing Drone HD Camera Baby Turtle 800TVL BNF Betaflight F4 Pro V2 OSD Brushless RC Quadcopter for FRSKY D8


(Please Check carefully the pictures when you make order the combo set you want, Difference combo set with different Electronic Configuration. If you have any questions about it, Please feel free to contact us. And we can support technical support if you have any idea about the diy drone, This is our personalized assembly customization. We are waiting to hear from you.)

Specifications:

  • Brand Name: JMT

  • Item Name: T180 4 Inch 3S Brushless FPV drone

  • Wheelbase: 180mm

  • Frame Kit Material: Carbon Fiber + 3D Printed

  • Camera: Caddx Baby Turtle 800TVL Super WDR FPV Camera HD DVR

  • Flight control: Betaflight F4 Pro (V2) Flight Control Built-in OSD / BEC

  • FPV Transmitter: HGLRC GTX226 SMA / RP-SMA Female Antenna PAL / NTSC 5.8G 48CH 25/200/600mW Switchable

  • FPV Antenna: Pagoda3 Omnidirectional Antenna 5.8G Image Transmission

  • FPV Receiver optional: Mini FPV Video Goggles 3 Inch Double Antenna 5.8G 40CH Built-in 3.7V 1200mAh Battery

  • Motor: MT2204 Motor 2204 2300KV Brushless Motor CW CCW

  • ESC: BS430 ESC 30A 3-6S 4 in 1 BLHeli-S firmware Dshot 4x30A F3 F4 Fly-tower Speed Controller

  • Propeller: Gemfan 4032 4 inch 3-blade CW CCW

  • Lipo Battery: JMT 11.1V 1500MAH 40C XT60 Plug

  • Flight time: about 10 minutes (the specific flight time depends on the movement of your flight)

  • Charger: IMAXRC B3 Pro Balance Charger, EU/US Plug optional

  • Receiver : Super Small FD800 Mini D8 Receiver SBUS PPM Compatible FRSKY ACCST

  • Color: 4 Colors of 3D Printed Canopy optional, Black/Blue/Red/Yellow optional

Features:
* JMT T180 is designed for 1080P HD Camera Recording. Working with 2300KV motor and 4-inch propellers.
* Full 3K Carbon Fiber Frame,high-strength and low-weight,resistant to falling and durable.
* The aircraft has rise, fall, hover, forward, backward, left turn, right turn, left fly, right fly, self-stable, semi-stable, buzzer in the air. All have been set, manual mode (for new player) and other modes need to be set by yourself.
* Available from the first perspective + recorded video
* Support 2-3S Lipo battery
* Support betaflight version F4 flight control built-in OSD
* We have debugged and calibrated the flight control and ESC. It is no longer necessary to make complicated settings for the flight control, and it can be assembled simply by flying.
* Soft TPU material helps protect the camera in the event of a collision
* Camera angle adjustable,Caddx Baby Turtle HD version
* Compatible with 2s-4s Lipo / LIHV
* VTX supports 25/100/200/400mW adjustable with OSD
* FPV Video Goggles can be chosen, experience the first flight perspective.
* BNF(with Receiver) /PNF Standard (with Lipo battery and charger) /PNF Upgrade (with Lipo battery and charger,Upgrade the FPV Receiver Goggles) difference version you can choose, Assembly.
* Parameter software: https://github.com/betaflight/betaflight-configurator 

Note:
1. Simple operation with manuals, do not need to make tedious setup and debugging to the Flight controller, simply assembled to fly.
2. The first perspective of racing flight (Novice caution).
We have debugged and calibrated the flight control and ESC. It is no longer necessary to make complicated settings for the flight control, and it can be assembled simply by flying.


Pay Attention:
1. Do not charge the battery when you are not at home. Do not charge the battery immediately after flying. Do not over-discharge the battery. (Over-discharge may cause the battery to become uncharged and become obsolete.) If the battery is fully charged, it may not be charged for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering the aircraft. After the flight is over, unplug the power supply and turn off the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. When there is no wind, you can fly outside the open space to avoid flying in the crowd and surrounding areas with interference.
5. The product is soldered. If there are any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to answer the relevant questions.
6. This product is not a toy and is not suitable for children under 14 years old.
7. Please read the instructions carefully before use. If you are a beginner, it is recommended to be assisted by experienced adults.
8. Because the aircraft is relatively small, do not fly high and fly far in your own line of sight. 9. Novices should pay attention to the aircraft when turning, do not take the plane with your hand or let the child take it to prevent being scratched.
10. When the aircraft falls into the wall or hit other objects at high altitude, please turn off the start switch in time. Otherwise, it may cause damage to the flight control motor. Check the aircraft for damage. If the screw is loose, wait until everything is normal before you can take off again. 

(BNF for FRSKY D8 Receiver) Package included:
JMT T180 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy *1 (4 Colors optional)
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
JMT Betaflight F4 Pro (V2) Flight Control Built-in OSD / BEC  *1
JMT BS430 ESC 30A 3-6S 4 in 1 BLHeli-S firmware Dshot 4x30A  *1
2204 2300KV Brushless Motor CW *2
2204 2300KV Brushless Motor CCW *2  
Gemfan 4032 4 inch 3-blade CW CCW *2 Pairs   
HGLRC GTX226 VTX 5.8G 48CH 25/200/600mW Switchable *1
Pagoda3 Omnidirectional Antenna 5.8G Image Transmission *1
FD800 Tiny 8CH SBUS / PPM Receiver *1
JMT 5V Buzzer Alarm Beeper *1

  (PNF Standard for FRSKY D8 Receiver) Package included:
JMT T180 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy *1 (4 Colors optional)
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
JMT Betaflight F4 Pro (V2) Flight Control Built-in OSD / BEC  *1
JMT BS430 ESC 30A 3-6S 4 in 1 BLHeli-S firmware Dshot 4x30A  *1
2204 2300KV Brushless Motor CW *2
2204 2300KV Brushless Motor CCW *2  
Gemfan 4032 4 inch 3-blade CW CCW *2 Pairs   
HGLRC GTX226 VTX 5.8G 48CH 25/200/600mW Switchable *1
Pagoda3 Omnidirectional Antenna 5.8G Image Transmission *1
FD800 Tiny 8CH SBUS / PPM Receiver *1
JMT 11.1V 1500MAH 40C XT60 Plug *1
IMAXRC B3 Pro Balance Charger *1 (EU/US Plug optional)
JMT 5V Buzzer Alarm Beeper *1
Connecting Cable Accessories *1 

(PNF Upgrade for FRSKY D8 Receiver) Package included:
JMT T180 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy *1 (4 Colors optional)
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
JMT Betaflight F4 Pro (V2) Flight Control Built-in OSD / BEC  *1
JMT BS430 ESC 30A 3-6S 4 in 1 BLHeli-S firmware Dshot 4x30A  *1
2204 2300KV Brushless Motor CW *2
2204 2300KV Brushless Motor CCW *2  
Gemfan 4032 4 inch 3-blade CW CCW *2 Pairs   
HGLRC GTX226 VTX 5.8G 48CH 25/200/600mW Switchable *1
Pagoda3 Omnidirectional Antenna 5.8G Image Transmission *1
FD800 Tiny 8CH SBUS / PPM Receiver *1
JMT 11.1V 1500MAH 40C XT60 Plug *1
IMAXRC B3 Pro Balance Charger *1 (EU/US Plug optional)
Mini FPV Video Goggles 3 Inch Double Antenna 5.8G 40CH Built-in 3.7V 1200mAh Battery *1
JMT 5V Buzzer Alarm Beeper *1
Connecting Cable Accessories *1

More Pictures as reference:

No related record found