JMT Supra F4 Flight Controller with OSD BEC and 12A BL_S 2-4 S 4In1 ESC with XM + + / f4 PRO V3.0 Flight Controller FRSKY / NR502T-F2 Receiver for BASKET Mini FPV Drone Item NO.: F31136-E/F31136-F/F31136-G

JMT Supra F4 Flight Controller with OSD BEC and 12A BL_S 2-4 S 4In1 ESC with XM + + / f4 PRO V3.0 Flight Controller FRSKY / NR502T-F2 Receiver for BASKET Mini FPV Drone

XM + + Receiver Specification:

Item name: Frsky XM + / XM Plus receiver
Operating range: Complete range
Operating Voltage Range: 3.7V ~ 10V
Operating current: 30mA @ 5V
Number of Channels: Up to 16CH from SBUS (CH1 ~ CH15 for PWM, CH16 RSSI for FC)

Compatible transmitter: Frsky X9D X12S


FRSKYRicevitoreSpecifica:

Specific:

Channel: 8CH

Fail-safe: All channels

Telemetry: YES

RC Range: more than 1 KM

Output format: PWM PPM SBUS

Frequency range: 2400-2483.5 MHz

Antenna length: 15 centimeters

Size: 36mm * 24mm

Weight: 7g

Compatible transmitter: X9D / X9D Plus / DIT / DFT / X9E / X12S


NR502T-F2RicevitoreSpecifica:

NR502T series of receivers are super-small size, but long-range and support the new receiver data designed specifically for FPV flight. High-efficiency PA and LNA are integrated on its hardware, even two bi-directional serial ports are integrated. Different types of communication protocols are easily switchable; We can supply up 2 types of this series receivers, all of them can be used on any F4 and F7 flight control card with or without inverter signal.

Features:

1) super small size

2) Super light 1.6g

3) All NR502T series receivers can be used on any F4 and F7 flight control card with or without inverter signal.

4) able to connect and work on any F4 and F7 serial port flight control card;

5) IPEX4 antenna plug;

6) Diversity antenna provides the best range and best radio frequency performance!

7) supports data-back function (Note: b1 version does not support this function as it is limited by its protocol)

8) supports working temperature measurement;

9) support RSSI output;

10) supports inverted SBUS

11) supports normal or inverted FPort

Compatible transmitter: FRSKY T16 jumper

Binding of operation: Presses the tie breaker after NR502T receiver is powered, it enters into binding mode after 2 seconds when the slow flashing red The LED becomes fast flashing. Then pair the receiver according to the manual transmitter. When the fast flashing red LED lights up for Solid Luminous, it indicates binding is successful. RF Link Variable technology: RF Link Variable technology: When the receiver is too close to the radio (remote control), normally the RF signal will be blocked and meanwhile losing control happens, Link Variable RF is born to solve the problem! As soon as the RF Link Variable deems that the Receiver has come close to the radio, it will adjust LNA gain and lack of PA lower output power to avoid Automatic short distance control; When RF Link Variable detects that the receiver is going far away from the radio, it will adjust LNA gain and PA output higher Power to increase RX of the working range automatically.