Home>Computer Accessories>JMT Play F4 Whoop Flight Controller & 4in1 ESC FE200T 5.8G 40CH FPV Transmitter VTX for DIY RC Drone Kit FPV Racing Quadcopter
JMT Play F4 Whoop Flight Controller & 4in1 ESC FE200T 5.8G 40CH FPV Transmitter VTX for DIY RC Drone Kit FPV Racing Quadcopter

JMT Play F4 Whoop Flight Controller & 4in1 ESC FE200T 5.8G 40CH FPV Transmitter VTX for DIY RC Drone Kit FPV Racing Quadcopter Item NO.: F29845-B

Write a Review
US$ 38.24
US$ 44.99 Save US$ 6.75 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name JMT Play F4 Whoop Flight Controller & 4in1 ESC FE200T 5.8G 40CH FPV Transmitter VTX for DIY RC Drone Kit FPV Racing Quadcopter
Item NO. F29845-B
Weight 0.042 kg = 0.0926 lb = 1.4815 oz
Category Computer Accessories
Brand JMT
Creation Time 2019-11-11

JMT Play F4 Whoop Flight Controller & 4in1 ESC FE200T 5.8G 40CH FPV Transmitter VTX for DIY RC Drone Kit FPV Racing Quadcopter

Package Included:
1x QwinOut F4 Flight Controller Built-in ESC Module 
1 X FE200T picture transmission module  


JMT Play F4 Whoop Flight Controller AIO OSD BEC & Built-in 5A BL_S 1-2S 4in1 ESC for RC Drone FPV Racing Quadcopter

Brand Name: QwinOut
Model: Play F4 Whoop
Item Name: F4 Flight Controller Built-in 5A 4In1 ESC
Board Size: 28.5x28.5mm
Screw Hole Spacing: 24.5x24.5mm ( M3) 
Board Weight: 3g

F4 Flight Controller
CPU: STM32F411CEU6
Sensor: MPU6000 Triaxial accelerometer/  Triaxial Gyroscope ( SPI Connection)
Input Voltage: 1-2S Lipo 
BEC: 0.5A ( 1S ) ; 1.5A ( 2S ) 
Built-in OSD interface 
- Support BLHeli Suite ESC programming 
- Support Voltage Detection
- Support LED Strip
- Support Smart Audio OSD Control
- Support Buzzer 
- Support Compatible PPM, SBUS, IBUS, DSM2/DSMX Receiver

5A ESC:
Input Voltage: 1-2S
Con. Current: 5A
Peak Current: 7A ( 2S)
Support BLHeliSuite Programmable 
Factory Firmware: S_H_50_REV16_7.HEX
- Support Oneshot125, Multishot, DShot150, DShot300, DShot600, PWM


JMT FE200T 5.8G 40CH Transmitter 25mW 100mW 200mW OSD Adjustable AV 4.5-5.2V IPEX VTX for Flight Controller RC FPV Racing Drone

The FE200T series is transmitted as a 5.8G ISM band analog image transmission. It has stable output power, long transmission distance and strong power supply filtering. It can ensure that the image has no snowflake and no horizontal stripes under the maximum throttle. The picture adopts the flight control OSD (TXD) signal to control the transmission frequency (IRC Tramp), and only needs to connect any TXD (serial port transmission) of the flight control to the RXD (serial port reception) of the picture transmission, and also The function of manual button switching is retained. Support PIT mode tuning.


Features:
1. The output power is stable and the transmission distance is long.
2. Fast 3-speed power switching, independent two red indicators, indicating the current transmitting power of 25/100/200MW.
3. The frequency point uses 4*3 LEDs to display 40 channel values.
4, support OSD remote tuning (IRC Tramp), support PIT mode tuning, can only be opened in the OSD.
5, small size, the antenna uses IPEX interface, reducing the footprint of the PCB board.
6, small size: 16.5mm * 16.5mm, mounting hole M1.
7, light weight: 1.7g

Performance:
1, input voltage: DC 4.5-5.2V
2. Input current: 200MW = 400 MA
3, power switching: third gear 25MW, 100MW, 200MW
4, signal channel: 40
5, frequency switching: manual button / OSD (IRC Tramp) (simultaneous support)
6, antenna interface: IPEX
7, the dimensions: 16.5MM * 16.5MM


The FE200T series is transmitted as a 5.8G ISM band analog image transmission. It has stable output power, long transmission distance and strong power supply filtering. It can ensure that the image has no snowflake and no horizontal stripes under the maximum throttle. The picture adopts the flight control OSD (TXD) signal to control the transmission frequency (IRC Tramp), and only needs to connect any TXD (serial port transmission) of the flight control to the RXD (serial port reception) of the picture transmission, and also The function of manual button switching is retained. Support PIT mode tuning.


Features:
1. The output power is stable and the transmission distance is long.
2. Fast 3-speed power switching, independent two red indicators, indicating the current transmitting power of 25/100/200MW.
3. The frequency point uses 4*3 LEDs to display 40 channel values.
4, support OSD remote tuning (IRC Tramp), support PIT mode tuning, can only be opened in the OSD.
5, small size, the antenna uses IPEX interface, reducing the footprint of the PCB board.
6, small size: 16.5mm * 16.5mm, mounting hole M1.
7, light weight: 1.7g

Performance:
1, input voltage: DC 4.5-5.2V
2. Input current: 200MW = 400 MA
3, power switching: third gear 25MW, 100MW, 200MW
4, signal channel: 40
5, frequency switching: manual button / OSD (IRC Tramp) (simultaneous support)
6, antenna interface: IPEX
7, the dimensions: 16.5MM * 16.5MM

 
GND power supply negative
+5V power supply positive
RXD flight control serial transmission

VIN camera video input


No related record found