Home>DIY RC Drone Accessories>Flight Control>JMT Long Range 5.8G 1W FPV Video Transmitter VTX 25/200/400/800MW 1000mW Switchable 2-6S High Power OSD for Toothpick RC Drone
JMT Long Range 5.8G 1W FPV Video Transmitter VTX 25/200/400/800MW 1000mW Switchable 2-6S High Power OSD for Toothpick RC Drone

JMT Long Range 5.8G 1W FPV Video Transmitter VTX 25/200/400/800MW 1000mW Switchable 2-6S High Power OSD for Toothpick RC Drone Item NO.: F35950

Write a Review
US$ 12.32
US$ 14.49 Save US$ 2.17 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name JMT Long Range 5.8G 1W FPV Video Transmitter VTX 25/200/400/800MW 1000mW Switchable 2-6S High Power OSD for Toothpick RC Drone
Item NO. F35950
Weight 0.05 kg = 0.1102 lb = 1.7637 oz
Category DIY RC Drone Accessories > Flight Control
Brand jmt
Creation Time 2020-06-16

JMT Long Range 5.8G 1W FPV Video Transmitter VTX 25/200/400/800MW 1000mW Switchable 2-6S High Power OSD for Toothpick RC Drone



VTX5840 series image transmission is 5.8G ISM band analog image transmission. It has the characteristics of stable output power, long transmission distance, strong power filtering, and can ensure that the image has no snowflakes and no horizontal stripes under the maximum throttle. It adopts stackable installation, design 30.5 * 30.5MM M3 screw holes, and the back is equipped with heat sink. The image transmission supports IRC OSD tuning, while retaining the key function, 5 levels of power can be adjusted.
 
Features:
1. Fast 5-speed power switching, independent two red indicator lights, indicating the current transmit power 25/200/400/800 / 1000MW.
2. The frequency point uses 6 LEDs to display 40 channel values.
3. Support OSD tuning.
4. The antenna adopts MMCX to SMA extension cable, which reduces the PCB space.
5. Powerful power chip, input up to 27V, output 5V / 2A low ripple, small interference.
6. Do not install the antenna to power on, it will not burn the picture transmission.
7. Light weight: 4.1g (not including antenna and plug cable).
 
Performance:
1. Input voltage: DC 7V-27V (2-6S)
3. Output voltage: DC 5V 2A
4. Power switching: 5th gear 25MW, 200MW, 400MW, 800MW, 1000MW
5. Signal channels: 40
6. Frequency point switch: manual key / IRC OSD (also supports)
7. Antenna interface: MMCX (distribution to SMA extension cable)
8. Dimensions: 36MM * 36MM Pitch: 30.5 * 30.5MM, M3
 
Overall introduction:
+ 5V GND VIDEO
Camera power supply (5V)
VIN GND
Input power supply (7-27V)
RXD
Flight controller sends IRCOSD serially
LED indication: L1-L6 channels, P1-P2 power
 
Frequency adjustment:
I. Manual adjustment
FR button Switches channels, 6 LEDs indicate channels. Default channel 5865
Power switching:
POW button Power adjustment. The default shipment is 25MW.


GHVTX-5840 series is a 5.8G ISM band pass analog image transmission, having a stable output power, transmission distance, strong power filter, to ensure that the image without snow at full throttle, and so no stripes. Using stackable mounting, design M3 screw hole of 25.5 * 25.5MM. The image transmission supports IRC OSD tuning, while retaining the key function, 5 levels of power can be adjusted.

 
Features:
1. Fast 5-speed power switching, independent two red indicator lights, indicating the current transmit power 25/200/400/800 / 1000MW.
2. The frequency point uses 6 LEDs to display 40 channel values.
3. Support OSD tuning.
4. Powerful power chip, input up to 27V, output 5V / 2A low ripple, small interference
5, the antenna power is not installed, it will not pass burn FIG.
6, light weight: 3.6g (not including the antenna and cable plug).
 
 Performance:
1. Input voltage: DC 7V-27V (2-6S)
3. Output voltage: DC 5V 2A
4. Power switching: 5th gear 25MW, 200MW, 400MW, 800MW, 1000MW
5. Signal channels: 40
6. Frequency point switch: manual key / IRC OSD (also supports)
7, Antenna Interface: IPEX
8. Dimensions: 40MM * 40MM Pitch: 25.5 * 25.5MM, M3
 
Overall introduction:
+ 5V GND VIDEO
Camera power supply (5V)
VIN GND
Input power supply (7-27V)
RXD
Flight controller sends IRCOSD serially
LED indication: L1-L6 channels, P1-P2 power
 
Frequency adjustment:
 I. Manual adjustment
FR button Switches channels, 6 LEDs indicate channels. Default channel 5865
Power switching:
POW button Power adjustment. The default shipment is 25MW.


No related record found