Home>DIY RC Drone Accessories>Motor>JMT Lefei137 137mm 3 inch 2-3S FPV Drone Brushless BNF Mini F4 BLheli_S ESC 15A Baby Turtle 800TVL WDR HD Camera RC Quadcopter Video Goggles RTF Upgraded Assembled
JMT Lefei137 137mm 3 inch 2-3S FPV Drone Brushless BNF Mini F4 BLheli_S ESC 15A Baby Turtle 800TVL WDR HD Camera RC Quadcopter Video Goggles RTF Upgraded Assembled

JMT Lefei137 137mm 3 inch 2-3S FPV Drone Brushless BNF Mini F4 BLheli_S ESC 15A Baby Turtle 800TVL WDR HD Camera RC Quadcopter Video Goggles RTF Upgraded Assembled Item NO.: F31512-A F31512-B F31512-C F31512-D F31512-E

Write a Review
US$ 127.38
US$ 149.86 Save US$ 22.48 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name JMT Lefei137 137mm 3 inch 2-3S FPV Drone Brushless BNF Mini F4 BLheli_S ESC 15A Baby Turtle 800TVL WDR HD Camera RC Quadcopter Video Goggles RTF Upgraded Assembled
Item NO. F31512-A F31512-B F31512-C F31512-D F31512-E
Weight 0.195 kg = 0.4299 lb = 6.8784 oz
Category DIY RC Drone Accessories > Motor
Brand jmt
Creation Time 2019-10-09

JMT Lefei137 137mm 3 inch 2-3S FPV Drone Brushless BNF Mini F4 BLheli_S ESC 15A Baby Turtle 800TVL WDR HD Camera RC Quadcopter Video Goggles RTF Upgraded Assembled

 

(Please Check carefully the pictures when you make order the combo set you want, Difference combo set with different Electronic Configuration. If you have any questions about it, Please feel free to contact us. And we can support technical support if you have any idea about the diy drone, This is our personalized assembly customization. We are waiting to hear from you.)

Specifications:
Brand Name: JMT
Item Name: 137mm Lefei137 3 Inch 3S Brushless FPV drone
Wheelbase: 137mm
Frame Kit Material: Carbon Fiber + 3D Printed
Camera: Caddx Baby Turtle 800TVL Super WDR FPV Camera HD DVR
Flight control: HAKRC Mini F4 flight control built-in OSD, can support PPM, SBUS (RX1), IBUS (RX6), ds m2 (RX6) function receiver
FPV Transmitter: 40CH Mini VTX 25mw / 200mw Switchable
FPV Receiver optional: Mini FPV Video Goggles 3 Inch Double Antenna 5.8G 40CH Built-in 3.7V 1200mAh Battery
Motor: 1105 5000KV Brushless
ESC: HAKRC 15A Blheli_S 4 In 1 ESC Supports D-shot 150, D-shot 300, D-shot 600, Oneshot125 and Multishot
Propeller: GEMFAN 3025 2-blade
Lipo Battery: JMT 3S 11.1V 450mah
Flight time: about 4 minutes (the specific flight time depends on the movement of your flight)
Charger: IMAXRC B3 Pro Balance Charger, EU/US Plug optional
Receiver Option 1: JMT FD800 Tiny 8CH SBUS / PPM Receiver Compatible FRSKY ACCST D8 and X9D(Plus)
Receiver Option 2: Flysky FS-A8S 2.4G 8CH Mini Receiver with PPM Output
Transmitter Option: Flysky FS-i6 2.4G 6ch RC Transmitter (Only compatible with Flysky Receiver)

Features:
*JMT lefei137 is designed for HD 1080P HD Camera Recording. Working with 5000KV motor and 3-inch propellers, you can experience as 5-inch propellers.
*Soft TPU material helps protect the camera in the event of a collision
*Camera angle adjustable,Caddx Baby Turtle HD version
*The battery fixed strap on the aircraft can be adjusted to fix different sizes of batteries with different bayonet ports.
*Compatible with 2s-4s Lipo / LIHV
*VTX supports 25mW / 200mW selection with OSD input and output interface
*FPV Video Goggles can be chosen, experience the first flight perspective.
*BNF(with Receiver) /PNF (with Lipo battery and charger) /RTF (Ready to Fly full set) difference version you can choose, Assembly.
*Parameter software: https://github.com/betaflight/betaflight-configurator  


Note:
1. Simple operation with manuals, do not need to make tedious setup and debugging to the Flight controller, simply assembled to fly.
2. The first perspective of racing flight (Novice caution).
.. We have debugged and calibrated the flight control and ESC. It is no longer necessary to make complicated settings for the flight control, and it can be assembled simply by flying.


Pay Attention:
1. Do not charge the battery when you are not at home. Do not charge the battery immediately after flying. Do not over-discharge the battery. (Over-discharge may cause the battery to become uncharged and become obsolete.) If the battery is fully charged, it may not be charged for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering the aircraft. After the flight is over, unplug the power supply and turn off the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. When there is no wind, you can fly outside the open space to avoid flying in the crowd and surrounding areas with interference.
5. The product is soldered. If there are any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to answer the relevant questions.
6. This product is not a toy and is not suitable for children under 14 years old.
7. Please read the instructions carefully before use. If you are a beginner, it is recommended to be assisted by experienced adults.
8. Because the aircraft is relatively small, do not fly high and fly far in your own line of sight. 9. Novices should pay attention to the aircraft when turning, do not take the plane with your hand or let the child take it to prevent being scratched.
10. When the aircraft falls into the wall or hit other objects at high altitude, please turn off the start switch in time. Otherwise, it may cause damage to the flight control motor. Check the aircraft for damage. If the screw is loose, wait until everything is normal before you can take off again. 


(BNF for FRSKY) Package included:
JMT lefei137 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy and Battery Fixed Belt *1
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
HAKRC Mini F4 Flight Controller  *1
HAKRC 15A Blheli_S 4 In 1 ESC  *1
XT1105 5000KV Brushless Motor *4    
GEMFAN 3025BN 3 Inch Propeller 1.5mm Shaft *4 Pairs   
40CH Mini VTX 25mw / 200mw Switchable FPV Transmitter *1
FD800 Tiny 8CH SBUS / PPM Receiver *1


  (PNF Upgrade FRSKY) Package included:
JMT lefei137 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy and Battery Fixed Belt *1
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
HAKRC Mini F4 Flight Controller  *1
HAKRC 15A Blheli_S 4 In 1 ESC  *1
XT1105 5000KV Brushless Motor *4    
GEMFAN 3025BN 3 Inch Propeller 1.5mm Shaft *4 Pairs   
40CH Mini VTX 25mw / 200mw Switchable FPV Transmitter *1
FD800 Tiny 8CH SBUS / PPM Receiver *1
JMT 11.1V 35C 450MAH Lipo Battery *1
IMAX RC B3 Pro Compact Balance Charger *1 (EU/US Plug optional)
JMT Mini FPV Video Goggles *1

 

(BNF FLSKY Remote)Package included:
JMT lefei137 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy and Battery Fixed Belt *1
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
HAKRC Mini F4 Flight Controller  *1
HAKRC 15A Blheli_S 4 In 1 ESC  *1
XT1105 5000KV Brushless Motor *4    
GEMFAN 3025BN 3 Inch Propeller 1.5mm Shaft *4 Pairs   
40CH Mini VTX 25mw / 200mw Switchable FPV Transmitter *1
Flysky FS-A8S 2.4G 8CH Mini Receiver  *1
Flysky FS-i6 2.4G 6ch RC Transmitter *1 (Default Mode 2 Left Throttle)

   (RTF V1 FLSKY Remote) Package included:
JMT lefei137 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy and Battery Fixed Belt *1
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
HAKRC Mini F4 Flight Controller  *1
HAKRC 15A Blheli_S 4 In 1 ESC  *1
XT1105 5000KV Brushless Motor *4    
GEMFAN 3025BN 3 Inch Propeller 1.5mm Shaft *4 Pairs   
40CH Mini VTX 25mw / 200mw Switchable FPV Transmitter *1
Flysky FS-A8S 2.4G 8CH Mini Receiver  *1
Flysky FS-i6 2.4G 6ch RC Transmitter *1 (Default Mode 2 Left Throttle)
JMT 11.1V 35C 450MAH Lipo Battery *1
IMAX RC B3 Pro Compact Balance Charger *1 (EU/US Plug optional)

   (RTF V2 FLSKY Remote) Package included:
JMT lefei137 Carbon Fiber Frame Kit *1   
JMT 3D Printed Camera Canopy and Battery Fixed Belt *1
Caddx Baby Turtle Normal Version 800TVL FPV Camera HD DVR *1
HAKRC Mini F4 Flight Controller  *1
HAKRC 15A Blheli_S 4 In 1 ESC  *1
XT1105 5000KV Brushless Motor *4    
GEMFAN 3025BN 3 Inch Propeller 1.5mm Shaft *4 Pairs   
40CH Mini VTX 25mw / 200mw Switchable FPV Transmitter *1
Flysky FS-A8S 2.4G 8CH Mini Receiver  *1
Flysky FS-i6 2.4G 6ch RC Transmitter *1 (Default Mode 2 Left Throttle)
JMT 11.1V 35C 450MAH Lipo Battery *1
IMAX RC B3 Pro Compact Balance Charger *1 (EU/US Plug optional)
JMT Mini FPV Video Goggles *1

More Pictures as reference:




No related record found