IFlight RTF Alpha A75 Analog Whoop 20A F4 Whoop AIO 300mW 78mm Brushless 3S Tinywhoop iF8 Remote Controller DVR FPV Goggles for RC Drone

Copy and share this link on social network or send it to your friends


IFlight RTF Alpha A75 Analog Whoop 20A F4 Whoop AIO 300mW 78mm Brushless 3S Tinywhoop iF8 Remote Controller DVR FPV Goggles for RC Drone Item NO.: F43166-D1 F43166-D2

Write a Review
US$ 288.03 (5% Off)
US$ 303.19 Save US$ 15.16
Left Hand Throttle Right Hand Throttle
Shipping Cost:
Estimate Shipping Cost

Product Name IFlight RTF Alpha A75 Analog Whoop 20A F4 Whoop AIO 300mW 78mm Brushless 3S Tinywhoop iF8 Remote Controller DVR FPV Goggles for RC Drone
Item NO. F43166-D1 F43166-D2
Weight 0.58 kg = 1.2787 lb = 20.4589 oz
Category RC Toy Drone > iFlight
Brand iFlight
Creation Time 2021-03-12

IFlight RTF Alpha A75 Analog Whoop 20A F4 Whoop AIO 300mW 78mm Brushless 3S Tinywhoop iF8 Remote Controller DVR FPV Goggles for RC Drone

66.9 grams (without battery)
Butter smooth XING 1103 8000KV,more torque and efficiency 
Ducts to protect the sensitive environment or yourself
Pre-tuned with smooth cinematic settings
iFlight Albatross 5.8G light antenna upgrade (included)

Alpha A75 BNF Specs:
SucceX-D 20A Whoop F4 AIO Board
XING 1103 8000KV FPV Micro Motor
Wheelbase: 78mm
Body size: 102.9*102.9mm
Ducted propeller size: HQ 40mm 1.6 inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Weight: 52.1g (without battery)
Battery: 3S 450mAh (not included)

Alpha A75 Analog BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x Alpha 78mm Frame
1x RunCam Nano2 Camera 
1x 5.8G SucceX Micro Force VTX 300mW
1x iFlight Albatross RHCP 5.8g light antenna
1set x HQ 40mm 1.6 inch 4-blades (Set of 2 - Color May Vary)
1set x Gemfan 40mm 1.6inch 1635 3-blades (Set of 2 - Color May Vary)
2x 10*130mm iFlight Lipo Strap
1x iF8 Remote controller 
1x R81 receiver
1x iFlight FPV Goggles
3x FULLSEND 3S 450mAh batteries
1x battery charger

FC: SucceX-D 20A F4 Whoop AIO
Mounting pattern:25.5*25.5mm/φ3mm
BEC output:5V 2A/10V 2A
INA pad:UART2 (nR2) 
Constant current:20A,25A(Burst)
Current sensor:yes
ESC Telemetry:no
ESC Firmware:G-H-30 BLS

5.8GHz SucceX Micro 300mW VTX
-Power: PIT/25/100/200mW/300mW
-Antenna interface: IPEX (UFL)
-VTX protocol : IRC Tramp
-Size: 13.5x14.5mm
-Weight: 1.4g
- Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g

iF8 FPV Remote Controller
Size: 160*130*45mm
Weight: 233g
Frequency: 2.400GHZ-2.480GHZ
RF Module: Multi-Protocol Module Compatible (CC2500)
Protocol Options: D8 / D16 v1 FCC / D16 v1 LBT / D16 v2 FCC / D16 v2 LBT (No Frsky ACCESS support) 
Max. Tansmission Power: 20dB
Antenna gain: 2dBi
Range: 1~2km @ 20dB (depending on noise floor and RX)
Battery: Built in 3.7V 1000mAh Lithium battery
Charging: Built in USB-C charging
Firmware: OpenTX iF8 Edition (Special iF8 Edition)
Multiprotocol-TX-Module(Stick input protocol selection)
Channels: Up to 8 channels (depending on the model / receiver)

- All D8 and D16 compatible receivers! 
- Frsky ACCST protocol (no ACCESS protocol supported) 
- iF8 D8RX Receiver (LINK)
- iF16 Receiver 
iFlight FPV Goggles with DVR Function
Frequency: 40CH 5.8GHz
Built-in battery: 3.7V/2000mAh Battery
Size: 155*144*113mm
Weight: 295g with 3.7V 2000mAh battery
Headband: 3-Sided Adjustable Headband
Screen size: 4.3 Inch
Resolution: 800*480 (no blur after enlarge by the lens)
Brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
TF card: support up to 32G

Main Feature:
With DVR function video recording, picture saving
High brightness 4.3 inch LCD specially turned for FPV racing or Model airplane.
Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand includes race frequency.
Come with advanced auto-searching function ad show you the working frequency on screen.
Built-in 3.7V/2000mAh battery, each full charge revive around 3.5 hours working time. 3.5 hours working time.
Ergonomic design fit your faces.
92% transparent lens adopted, no distort, no blur on the adage of screen;
Light weight 295g with 3hr 2000mAh battery, RTF for any scale, racing, Model airplane game.
4.3 inch 480*272px HD high brightness LCD.

R81 Receiver
Frequency: 2400-2483.5Mhz
Dimension: 17*11mm
Weight: 2g
Numbers of Channel: 8
Signal form: D8
Output Formal: SBUS inverted/output RSSI
Operating Voltage: 4.5-6V
Antanna Length: 9cm

FULLSEND 3S 450mAh 75C Lipo Battery - XT30
-Minimum Capacity: 450mAh
-Configuration: 3S1P / 11.1V / 3 Cells
-Discharge Rate: 75C
-Net Weight: 39.2g
-Dimensions: 19.5*16.5*63mm
-Charge Plug: JST-XHR-4P
-Discharge Plug: XT30

M4 AC 30W 1-4S Battery Charger-XT30
Input: [email protected]
Battery Type: LiPo LiHV LiFe @1-4S
Charging Power: [email protected]
Bal Cur. : 200mA @2-4S
Charging accuracy: <0.005V
Display: LCD IPS 1.54 inch 240*240 resolution
Size: 75mm*54mm*30mm
Weight: 120g
Connector: XT30
Suitable for 4S 350mAh~850mAh LiPo Battery. For the bigger battery, please choose the ISDT Q6 NANO

Using Instructions
1.Connect the power cord,and after booting, enter the main interface
2.Press and hold the button for 2 seconds to select the battery cut-off voltage.
3.Press the button once to select the charging current.
4. Connected to the battery main port and balance port,the charger will automatically start charging after detecting that the battery voltage is normal.
5.After each power on, you need to press the key once to unlock it before it starts charging automatically.

1.M4AC allows input AC 100-240V, please use normal voltage.
2.Do does not use this product in heat,moisture, flammable or explosive atmospheres.
3.Make sure that the product is running under the attendance of the user.
4.Please unplug the input power when not using this product.

No related record found

You May Also Like