PRODUCT DESCRIPTION

Introducing what has been requested for too long already! A super-efficient iFlight
7inch Long-Range bird that can go where you couldn't go before and can
carry bigger batteries to get the flight time to surf the swiss alps if
you want! A super stiff frame for minimum resonance and XING2 2809
motors for maximum 7inch prop control. Fly big batteries top-mounted, or
even bigger batteries bottom-mounted, 6cells recommended or 5cells for
slow cruising. But whatever style you fly, a Lipo or Lion pack will just
do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S
2.500mAh above. 

GPS
functionality to find your way back and Betaflight GPS Rescue mode
ready to setup (default OFF to prevent unexpected behavior; Setup
instructions included). Vertical and horizontal TBS Crossfire antenna
mounts are included to cover you and your antenna dead-ends just in
case. GoPro universal TPU bottom stand included; fits your original
GoPro bracket and our TPU GoPro protectors (additional).

Main Changelog from Chimera7 to Chimera7 Pro:

- SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)

- New Lightweight Side Panels Design - Keep Your Rig Clean

- XING 2806.5 upgraded to XING2 2809 1250KV

- 7-inch frame upgraded to 7.5inch

HIGHLIGHTS:

- Battery voltage LED status light (illuminated IF logo on the bottom)

- 360° TPU protection, cam protection and antenna mounts

- GoPro TPU bottom stand (GoPro protector not included)
- Lightweight Side Panels Design - Keep Your Rig Clean

- No props in view
- XING2 2809 1250KV efficient wide stator motors

- 6mm rigid arm design for more stiffness

- Top- and bottom battery mount option

Specifications:

- Weight: 695g (without battery and GoPro mount)

- Total Dimensions: 258*200mm (body dimension)

- Upper(middle) Plate Thickness: 3mm

- Bottom to Top Distance: 20-29mm

- ESC: BLITZ E55 4-IN-1 2-6S ESC
- VTX: BLITZ 1.6W (Analog)
- Camera: (RaceCam R1 Mini 2.1mm Night Vision)

- Camera Plate Thickness: 3mm

- Bottom Plate Thickness: 3mm

- Top Plate Thickness: 3mm

- Geometry:  DC (DeadCat)

- HQ 7.5X3.7X3 Propellers

- Arm Thickness: 6mm

- XING2 2809 1250KV

- FC: BLITZ F722

ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC):

FC //BLITZ F722 Flight Controller

• Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter

• Smartaudio / IRC Tramp VTX protocol supported

• Firmware target: IFLIGHT_BLITZ_F722

• Motor outputs: 4x (SH1.0 connector)

• Flash: 32MB (Blackbox flash)

• I2C serial: SDA / SLA pads

• Dimensions: 36.5*35 mm

• Barometer: DPS310

• OSD Chip: AT7456E

• LED controller: Yes

• MCU: STM32 F722

• Beeper pad: Yes

• Gyro: BMI270

• Weight: 7.8g

• UARTS: 6

ESC // BLITZ E55 4-IN-1 2-6S 55A ESC

• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

• Mounting Holes: 30.5*30.5mm/Φ4mm

• Target:   IFLIGHT_BLITZ_G2

• Supports 2-6S Lipo input

• Current sensor: Yes

• Constant: 55 Amps 

• Current rate: 200

• Burst: 65 Amps

• Weight: 15.3g

• MCU: G071

• BEC: No