Hobbywing XRotor Micro No BEC 20A / 30A / 35A BLHeli Mini ESC Support OneShot125 w/ Wires for FPV Racing Drone Copters Item NO.: F18630-

Please Note : When you try to calibration throttle ,please take off propeller , in case the accident .

Features 

1.The use of F396 48MHz MCU, 3-in-1 drive IC, High quality MOSFETs 48MHz operating frequency .

2. Use BLHeli open source, through the throttle signal line upgrade or change parameters, support BLHeli full functionality.

Product Name : Hobbywing XRotor 20A ESC 

Spacification

Con./Peak.Current : 20A/30A

BEC : NO

Lipo: 2S-4S

Weight : 6.8g

Size : 24*13.9*5.5 mm

Wires & Connectors 

Input Wires: Red-20AWG-100mm*1; Black-20AWG-100mm*1

Output Wires: No wires but solder tabs

 Input Connectors: No

 Output Connectors: No

 (Note: All the wire length above is the original length not the length you see from the outside.)

 Features 

 Throttle Range Calibration: Supported

 Stick Programming: Stick Programming/BLHeliSuite

 DEO: Not Supported

 OneShot Mode: Supported

Timing: Supported

Light Color: Not Supported

Motor Rotation: Supported

Suitable 

 FPVs with 130-280mm Diagonal Wheelbase

Product Name : Hobbywing XRotor 30A ESC 

Spacification 

Con./Peak.Current : 30A/40A

BEC : NO

Lipo: 2S-4S

Weight : 6.8g

Size : 24*13.9*5.5 mm

Wires & Connectors 

Input Wires: Red-18AWG-100mm*1;Black-18AWG-100mm*2

Output Wires: No wires but solder tabs

Input Connectors: No

Output Connectors: No

(Note: All the wire length above is the original length not the length you see from the outside.)

Features 

Throttle Range Calibration: Supported

Stick Programming: Stick Programming/BLHeliSuite

DEO: Not Supported

OneShot Mode: Supported

Timing: Supported

Light Color: Not Supported

Motor Rotation: Supported

Suitable

FPVs with 130-280mm Diagonal Wheelbase

Product Name : Hobbywing XRotor 35A ESC 

Spacification 

Con./Peak.Current : 35A/50A

BEC : NO

Lipo: 3S-6S

Weight : 9.5g

Size : 26.5*16.7*5.5 mm

Wires & Connectors 

Input Wires: Red-18AWG-100mm*1;Black-18AWG-100mm*3

 Output Wires: No wires but solder tabs

 Input Connectors: No

 Output Connectors: No

 (Note: All the wire length above is the original length not the length you see from the outside.)

 Features 

 Throttle Range Calibration: Supported

 Stick Programming: Stick Programming/BLHeliSuite

 DEO: Not Supported

 OneShot Mode: Supported

Timing: Supported

 Light Color: Not Supported

 Motor Rotation: Supported

Suitable

FPVs with 150-330mm Diagonal Wheelbase