Home>RC Toy Drone>Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera
Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera

Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera Item NO.: F28523-F28524-F28525-F28526

5.0
(1)
Write a Review
US$ 72.25
US$ 85.00 Save US$ 12.75 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera
  • Presale,will be ready for ship during May15th -May 30th
Product Name Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera
Item NO. F28523-F28524-F28525-F28526
Weight 0.2 kg = 0.4409 lb = 7.0548 oz
Category RC Toy Drone
Brand Happymodel
Creation Time 2019-04-16

Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera




Specifications:

Specifications:

Brand Name: Happymodel

Item Name: Sailfly-X 2-3S Micro FPV racing drone

Wheelbase: 105mm

Size: 95mm*95mm*50mm(without propellers)

Weight: 38g(without battery)

Weight:63g(with Original 3s 300mah Lipo battery )

 

Features:

Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible

The lightest 1102 brushless motor only 2.8g with double ball bearings

Light ,Powerful and smoothly

AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio

2mm carbon fiber frame with TPU 3d-printed canopy

Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)

Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)

Flysky version support both AFHDS and AFHDS-2A protocol transmitter

DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..

Full telemetry function ready (Frsky and Flysky version support)

Real Bind and Fly version

Compatible both for 2s-3s Lipo/LIHV

 

Package includes:

Item Name Qty
Sailfly-X frame 1
30 degree angle canopy(red 3d print tpu) 1
40 degree angle canopy(purple 3d print tpu) 1
Option1: Crazybee F4FR V2.1 PRO FC built-in Frsky RX 1
Option2: Crazybee F4FS V2.1 PRO FC built-in Flysky RX
Option3: Crazybee F4DX PRO V2.1 FC built-in Serial-bus DSM2/DSMX RX
Option4: Crazybee F4 V2.1 PRO FC no RX verion
EX1102 KV8500 Motor 1.5mm shaft 4
65mm propeller(6cw+6ccw) 1
HCF7P 25mw VTX/700tvl camera AIO 1
3S 11.4v 300mah 30C/60C battery 1
Propeller disassemble tool 1
Screwdriver 1

 

Spare parts specifications:

Motor Mode: EX1102 KV8500

Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S

Flight controller (Frsky version) CRAZYBEE F4FR PRO V2.1 Firmware target: CrazybeeF4FR

(Flysky version) CRAZYBEE F4FS PRO V2.1 Firmware target: CrazybeeF4FS

(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.1 Firmware target: CrazybeeF4DX

(No RX version) CRAZYBEE F4 PRO V2.1 Firmware target: CrazybeeF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 2-3S battery input (DC 7.4-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)

DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver

No RX version need to add external Receiver

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A BEC with LC filter

Built-in voltage detection

Onboard 4in1 ESC MCU upgraded to EFM8BB21

Power supply: 2-3S LiPo/LiPo HV (7.4v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Frsky receiver Version SPI BUS receiver

Frsky D8/D16 switchable

Compatible both Non EU and EU-LBT transmitter Channels: 8ch or 16ch

EU-LBT support(need to update betaflght v4.0 date 2019-04-11)

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky receiver Version SPI BUS receiver

Protocol: AFHDS and AFHDS-2A Switchable

Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Failsafe support

DSM2/DSMX receiver version Serial bus receiver

Protocol: DSM2/DSMX compatible

Channels:6-9 (Depend on your radio)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

PNP No RX version No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.
AIO Camera&VTX

(HCF7P)

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband

Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9″12.0mm ( L*W )
Weight: 3.2g

Lipo Battery Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 25g

Connector: XT30




 


2019-06-25

Ch****an

awesome Kit.
Flies really nice on 2s and really powerful on 3s.
And so cheap.