Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S 700TVL 

Camera TinyWhoop FPV Racing Drone Indoor Outdoor Racing Freestyle

Notice: the Mobula7 drones will come with new V2 Frame(Black frame or White frame randomly).The product is shown in the picture, there are many choices, please choose the kit you need!

Specification: 
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Size: 98mm*98mm*36mm

Weight: 25.9g (without battery)
 

Crazybee F4 Pro Flight Controller	Item Name: Crazybee F4 Pro FC MCU: STM32F403CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Receiver ( Diffirent version having diffirent receiver) Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A BEC with LC filter Built-in voltage detection BLHELI_S pass-through Ready Heading LED Ready Firmware (Frsky version) CRAZYBEEF4 PRO FR Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEEF4 PRO FS Firmware target: CrazybeeF4FS (DSM-2/DSM-X version) CRAZYBEEF4 PRO Firmware target: CrazybeeF4DX (Frsky EU-LBT version) CRAZYBEEF4 PRO FS Firmware target: CrazybeeF4FS
Onboard 5A 4 In 1 ESC	Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) MCU upgraded to EFM8BB21 Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7 Default protocol: DSHOT600
Onboard Frsky NON-EU receiver Version	SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Onboard Frsky EU-LBT Version (External XM+ receiver)	Operating Voltage Range: 3.7~10V Operating Current: 30mA @5V Operating Range: Full range With RSSI output on board: Analog 0~3.3V Firmware Upgradeable, Default firmware EU-LBT with RSSI
Onboard Flysky receiver Version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Onboard DSM-2 / DSMX receiver version	Serial bus receiver Protocol: DSM-2/DSM-X compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m
SE0802 16000KV Motor	Model: SE0802 KV: 16000KV Configu-ration: 9N12P Stator Diamter: 8mm Stator Length: 2mm Shaft Diameter: Φ1.0 Motor Dimension (Dia.*Len) : Φ10.5*14.5mm Weight: 1.8g Support 1-2S Lipo   No.of Cells: 1S Lipo
Propeller	40mm 3-blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera	5.8G 40CH 25mW VTX Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) 700TVL FOV120 Camera Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSM-X version not compatible) Size: 13.9"12.0mm ( L*W ) Weight: 3g
Lipo Battery	Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 55mmx12mmx7mm Weight: 6.5g Connector: PH2.0 Notes: Need 2pcs batteries for Series circuit

Features:
- New Crazybee F4 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Smartaudio ready , change VTX bands, channels via OSD
  DSM-2/DSM-X and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM-2/DSM-X version support DSM-2 and DSM-X compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

200RC FPV Wearable Watch 2" LCD 5.8G 48Ch FPV Monitor Wireless Receiver Watch LCD Display for FPV RC Drone Quadcopter
Description:
Model: 200RC
Item name: FPV Wearable Watch
Screen: 2" TFT LCD display.
Resolution: 480*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged 
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes

LST-009 5.8G 40CH 3inch Dual Antennas FPV Goggles Monitor

Highlight:
Double Antennas
Built-in 3.7V 1200mAh Battery
Support a key search frequency
RaceBand 40 channel Auto-Searching
Real-time video return 5.8G FPV Receiver
 

Feature:

● Small size and light weight;
● Low power consumption, Working current 300~330mA;
● Double antenna reception to make the signal more stable;
● RaceBand 40 channel, Auto-Searching;
● 3.0 Inch 480*320 dot high brightness LCD screen;
● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
● Universal USB charging interface;
● Real-time video return, Very low time-delay;
● Bilingual menu in support of Chinese and English;
● Support external video signal input;
● Support AV signal output (Connect external DVR);

LS-008D 5.8G FPV Googles VR Glasses 40CH 4.3 inch

product features

# Separable design ,4.3 inch screen canbe used as small monitor on radio controller or with tripod

# High brightness 4.3 inch LCD specially tuned for FPV racing or Model airplane

# Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.

# Come with advanced auto-searching function ad show yout the working frequency on screen

# Buit-in 3.7V/2000mA battery ,each full charge revive around 2 hours woking time

# Ergonomic design fit your faces

# 92%transparent lens adopted ,no distort,no blur on the adage of screen;

# Light weight 375g with 2hr 2000mAh battery,RTF for any scale,racing ,Model airplane game

# 4.3 inch 480*272px HD high brightness LCD