Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro BWhoop Mobula 7 FPV Racing Drone PNP BNF w/Turtle V2 HD Camera LiteRadio TX

Topsky 2 Inch 5.8Ghz 48CH FPV Watch Monitor Display Mmcx Antenna:

Product parameters:
Resolution: 320*240
Screen size: 4:3 2.0inch
Receive sensitivity: -96db
Antenna: MMCX 5.8G inner needle (product with antenna)
Interface: MMCX standard interface / Micro-USB interface
Video standard: NTSC/PAL adaptive
Battery: Built-in battery, 5V, 300mAh
Life time: 45 minutes or so
 
 
Key Function:
Long press the Band button: power on/off function
Long press CH button: automatically search and lock the strongest signal (travel 48 channels)
Short press the Band/CH button: Manually adjust the frequency band and frequency point
 

200RC FPV Wearable Watch 2" LCD 5.8G 48Ch FPV Monitor Wireless Receiver Watch LCD Display for FPV RC Drone Quadcopter
Description:
Model: 200RC
Item name: FPV Wearable Watch
Screen: 2" TFT LCD display.
Resolution: 480*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged 
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes

LST-009 5.8G 40CH 3inch Dual Antennas FPV Goggles Monitor

Highlight:
Double Antennas
Built-in 3.7V 1200mAh Battery
Support a key search frequency
RaceBand 40 channel Auto-Searching
Real-time video return 5.8G FPV Receiver
 

Feature:

● Small size and light weight;
● Low power consumption, Working current 300~330mA;
● Double antenna reception to make the signal more stable;
● RaceBand 40 channel, Auto-Searching;
● 3.0 Inch 480*320 dot high brightness LCD screen;
● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
● Universal USB charging interface;
● Real-time video return, Very low time-delay;
● Bilingual menu in support of Chinese and English;
● Support external video signal input;
● Support AV signal output (Connect external DVR);

LS-008D 5.8G FPV Googles VR Glasses 40CH 4.3 inch

product features

# Separable design ,4.3 inch screen canbe used as small monitor on radio controller or with tripod

# High brightness 4.3 inch LCD specially tuned for FPV racing or Model airplane

# Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.

# Come with advanced auto-searching function ad show yout the working frequency on screen

# Buit-in 3.7V/2000mA battery ,each full charge revive around 2 hours woking time

# Ergonomic design fit your faces

# 92%transparent lens adopted ,no distort,no blur on the adage of screen;

# Light weight 375g with 2hr 2000mAh battery,RTF for any scale,racing ,Model airplane game

# 4.3 inch 480*272px HD high brightness LCD

Mobula7 HD FPV Racing Drone Specifications:

Item Name: Mobula7 HD 2-3S 75mm Brushless Bwhoop drone

Wheelbase: 75mm

Size: 98mm*98mm*45mm

Weight: 48g(without battery)

Weight:72g(with Original 3s 300mah Lipo battery )

 

Features:

New Crazybee F4 PRO V3.0 AIO Flight controller 1-3s Lipo Compatible

2S for indoor Cine whoop mode

3S for outdoor Freestyle whoop mode

Betaflight support , multi flight mode: ACRO/AIR/ANGLE

The lightest 1102 brushless motor only 2.7g with double ball bearings

Powerful and smoothly

Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSM-X version no RSSI output)

Caddx turtle v2 + 1080p 60fps DVR ready

Camera Angle adjustable

VTX power switchable 25mw~200mw

Smartaudio ready , change VTX bands, powers, channels via OSD

Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible

Flysky version support both AFHDS and AFHDS-2A protocol transmitter

DSM-2/DSM-X version support DSM-2 and DSM-X compatible Spektrum transmitter

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..

Full telemetry function ready (Frsky Non-EU and Flysky version support)

Special Breath light ready

Real Bind and Fly version

Compatible both for 2s-3s Lipo/LIHV

 

Package includes:

 

1xMobula7 V3 Frame
1xCrazybee F4 V3.0 PRO FC
4xEX1102 KV90000 Motor
1x40mm propeller(4cw+4ccw)

Extra gift 1x40mm red propeller(4cw+4ccw)
1xCaddx Turtle v2+1080p 60fps DVR
1x5.8G 40ch 25mw-200mw VTX
1x3S 11.4v 300mah 30C/60C battery
1xPropeller disassemble tool
1xScrewdriver

Spare parts specifications:

Motor	Mode: EX1102 KV9000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):2.8g No.of Cells(Lipo):1S-3S
Flight controller	(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS (DSM2/DSM-X version) CRAZYBEE F4DX PRO V3.0 Firmware target: CrazybeeF4DX (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-3S battery input (DC 3.5-13V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable) DSM-2/X Version built-in Serial-based DSM-2/DSM-X compatible satellite receiver No RX version need to add external Receiver Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1-3S LiPo/LiPo HV (3.5v/13v) Current: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.Hex Default protocol: DSHOT600
Frsky NON-EU receiver Version	SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Flysky receiver Version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support
DSM-2/DSM-X receiver version	Serial bus receiver Protocol: DSM-2/DSM-X compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m
PNP No RX version	No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.
VTX	Output power: 25~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready Weight: 3g
CADDX Turtle V2	Image sensor: 1/2.7" CMOS sensor Horizontal: 800TVL TV system: NTSC/PAL changeable Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps Power Input: DC 4.5-20V FPV FOV: 155° Recording FOV: 170° Mini Illumination: 0.01lux Image Resolution: 2 Megapixels Lens: 1.8mm Turbo Eye Lens Working Current: 380mA@5V/160mA@12V (low consumption) OSD Menu: Yes (Support Voltage Display) Video Files: MP4 Audio: Support Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II) Color: Red
Lipo Battery	Capacity:300mAh Voltage:11.4v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 65mmx18mmx11mm Weight: 23g Connector: XT30

LiteRadio remote control 8CH