Home>RC Toy Drone>Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone Quadcopter w/ Upgrade BB2 ESC 700TVL BNF Compatible Frsky Flysky DSM2/DSMX Receiver
Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone Quadcopter w/ Upgrade BB2 ESC 700TVL BNF Compatible Frsky Flysky DSM2/DSMX Receiver

Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone Quadcopter w/ Upgrade BB2 ESC 700TVL BNF Compatible Frsky Flysky DSM2/DSMX Receiver Item NO.: F26131/F26132/F26133/F26134/F26135/F26136/F26137/F26138

4.7
(58)
Write a Review
US$ 86.70
US$ 102.00 Save US$ 15.30 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • Version: Basic Version / Standard Version ( Optional)
  • - The diffirence of them are the package charger.
  • Basic Version: USB Charger
  • Standard Version: 6-way Charger
  • Presale,the products will be available after our National Day Holiday!
Product Name Happymodel Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone Quadcopter w/ Upgrade BB2 ESC 700TVL BNF Compatible Frsky Flysky DSM2/DSMX Receiver
Item NO. F26131/F26132/F26133/F26134/F26135/F26136/F26137/F26138
Weight 0.887 kg = 1.9555 lb = 31.2880 oz
Category RC Toy Drone
Brand Happymodel
Creation Time 2018-09-28

Happymodel Mobula7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone w/ 700TVL Camera BNF

We will give you an extra 2 sets of paddles. There are 4 sets of blades (2 sets of red + 2 sets of black), one of which is installed on the plane, and the warehouse is shipped randomly with black or red.

Specification: 
Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
   Basic Version: USB Charger
   Standard Version: 6-way Charger

Receiver ( Optional): Compatible Frsky NON-EU Receiver
                                      Compatible Frsky EU-LBT   Receiver  ( XM+ Receiver)
                                      Compatible Flysky AFHDS/ AFHDS-2A Receiver
                                      Compatible DSM2/DSMX Receiver

Size: 98mm*98mm*36mm
Weight: 25.9g (without battery)

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
 
Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard Frsky EU-LBT Version
(External XM+ receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 

Onboard DSM2 / DSMX receiver version

Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
SE0802 16000KV Motor
Model: SE0802
KV: 16000KV
Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Support 1-2S Lipo
 
No.of Cells: 1S Lipo
Propeller
40mm 3-blade Propeller ( 4 CW + 4 CCW)
 

5.8G VTX AIO Camera
 

5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)

700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W )
Weight: 3g
 
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
 

Features:
- New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Smartaudio ready , change VTX bands, channels via OSD
  DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

Package Included:
Basic Version
1x Mobula7 75mm FPV Drone
8x 40mm 3-Blade Propellers ( 8 CW & 8 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 75mm FPV Drone
8x 40mm 3-Blade Propellers ( 8 CW & 8 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery

1x Screwdriver 


2021-09-07

E****.

Highly recommend starting out with this drone for FPV. Learning on this will save you money and time along with keeping you in the hobby. This also allows you the ability to fly either inside or out, so on those rainy days you can still get in some stick time.From the time I placed my order until I had this in my hands was 9 days.

2021-07-11

Ch****ss

Awesome little quad

2020-11-09

R****U

Product came sooner that expected which was nice. Everything worked as advertised

2020-02-02

Am****er

I originally bought this for flying inside my house but it is very powerful and took a lot of practice. If you want something indoors I might recommend a 1S whoop but hey, more power is always a good thing right

2020-01-10

N****n

As easpected great quad

2019-12-09

An****II

The charger does not come with any plug. So you have to source something for power. It could be tuned better.

2019-12-09

An****II

The charger does not come with any plug. So you have to source something for power. It could be tuned better.

2019-10-09

C****e

Your browser does not support HTML5 video.

 This is a great little drone, however, it takes a lengthy amount of programming and set up. You must bind the drone to your receiver, you must also flash the firmware (because it’s shipped with an incompatible version for betaflight), in order to setup the drone. Next you must adjust all the settings and alarms (the low-battery alarm is programmed improperly). I struggled with betaflight, set up, binding, and programming (driver errors, downloads, fixes) for almost 2 days in order to be able to use it. Don’t forget to calibrate the accelerator for stable flight (this is critical!), use a mug or cup to keep your drone level with the USB plugged in to BetaFlight for easy accelerometer calibration. I also use a mug for stability in take off as well. Once it’s all set up and programmed properly the drone functions and flys amazing. Both my 14 yr old son and I take turns flying all over the house and outside. I would highly recommend purchasing 4-6 extra batteries due to the fact that total flight time is only about 2-3 minutes and charging time 30-60mins. I would also recommend a multi-port USB adapter to quickly charge them at the same time (available here on Amazon, 2 four port chargers for $12). There are lots of YouTube setup walkthrough videos for this drone and it was the only way I was able to work my way through the setup and numerous issues. Be patient, take your time, and breathe, it’s all worth it in the end!

2019-10-08

C****e

 This is a great little drone, however, it takes a lengthy amount of programming and set up. You must bind the drone to your receiver, you must also flash the firmware (because it’s shipped with an incompatible version for betaflight), in order to setup the drone. Next you must adjust all the settings and alarms (the low-battery alarm is programmed improperly). I struggled with betaflight, set up, binding, and programming (driver errors, downloads, fixes) for almost 2 days in order to be able to use it. Don’t forget to calibrate the accelerator for stable flight (this is critical!), use a mug or cup to keep your drone level with the USB plugged in to BetaFlight for easy accelerometer calibration. I also use a mug for stability in take off as well. Once it’s all set up and programmed properly the drone functions and flys amazing. Both my 14 yr old son and I take turns flying all over the house and outside. I would highly recommend purchasing 4-6 extra batteries due to the fact that total flight time is only about 2-3 minutes and charging time 30-60mins. I would also recommend a multi-port USB adapter to quickly charge them at the same time (available here on Amazon, 2 four port chargers for $12). There are lots of YouTube setup walkthrough videos for this drone and it was the only way I was able to work my way through the setup and numerous issues. Be patient, take your time, and breathe, it’s all worth it in the end!

2019-10-08

C****e

 This is a great little drone, however, it takes a lengthy amount of programming and set up. You must bind the drone to your receiver, you must also flash the firmware (because it’s shipped with an incompatible version for betaflight), in order to setup the drone. Next you must adjust all the settings and alarms (the low-battery alarm is programmed improperly). I struggled with betaflight, set up, binding, and programming (driver errors, downloads, fixes) for almost 2 days in order to be able to use it. Don’t forget to calibrate the accelerator for stable flight (this is critical!), use a mug or cup to keep your drone level with the USB plugged in to BetaFlight for easy accelerometer calibration. I also use a mug for stability in take off as well. Once it’s all set up and programmed properly the drone functions and flys amazing. Both my 14 yr old son and I take turns flying all over the house and outside. I would highly recommend purchasing 4-6 extra batteries due to the fact that total flight time is only about 2-3 minutes and charging time 30-60mins. I would also recommend a multi-port USB adapter to quickly charge them at the same time (available here on Amazon, 2 four port chargers for $12). There are lots of YouTube setup walkthrough videos for this drone and it was the only way I was able to work my way through the setup and numerous issues. Be patient, take your time, and breathe, it’s all worth it in the end!

2019-10-08

C****e

This is a great little drone, however, it takes a lengthy amount of programming and set up. You must bind the drone to your receiver, you must also flash the firmware (because it’s shipped with an incompatible version for betaflight), in order to setup the drone. Next you must adjust all the settings and alarms (the low-battery alarm is programmed improperly). I struggled with betaflight, set up, binding, and programming (driver errors, downloads, fixes) for almost 2 days in order to be able to use it. Don’t forget to calibrate the accelerator for stable flight (this is critical!), use a mug or cup to keep your drone level with the USB plugged in to BetaFlight for easy accelerometer calibration. I also use a mug for stability in take off as well. Once it’s all set up and programmed properly the drone functions and flys amazing. Both my 14 yr old son and I take turns flying all over the house and outside. I would highly recommend purchasing 4-6 extra batteries due to the fact that total flight time is only about 2-3 minutes and charging time 30-60mins. I would also recommend a multi-port USB adapter to quickly charge them at the same time (available here on Amazon, 2 four port chargers for $12). There are lots of YouTube setup walkthrough videos for this drone and it was the only way I was able to work my way through the setup and numerous issues. Be patient, take your time, and breathe, it’s all worth it in the end!

2019-06-20

Mi****ve

If you are new, start out in stabilized mode. When you get good fly in air mode.

2019-06-20

Mi****ve

If you are new, start out in stabilized mode. When you get good fly in air mode.

2019-05-02

Am****er

The Mobula7 is a really nice little whoop class quad and in my opinion would make a perfect second quad after someone learns the basics with a brushed whoop. I still consider myself a noob in the RC hobby only into it in the past few years after coming back to it after decades. I've acquired a few quads in the last few years, a couple of mini's and a couple of micro's aka tiny whoops. I found that I have the most fun flying the whoops. The one issue a had with the whoops I had was the 1s battery limit and the brushed motors. 1s is fine most of the time zipping around indoors, sometimes I just wanted a bit more power available when flying outside to fight the wind, and when I fly I run through a lot of packs which meant I wore out motors rather quickly. The Mobula7 basically covered both of those issues giving me the option of 1s or 2s for batteries, and brushless motors that will hold up better to just flying about air you wearing out.

Is the Mobula7 perfect? Well nothing is perfect, but sometimes things are pretty close and the Mobula 7 is for me. I still think people wanting to try the hobby should start with a brushed whoop the Mobula7 is the perfect next step for new and casual hobbyists to continue learning the skills and maintenance/repair/tweaking knowledge you'll need for the larger quads.

2019-05-02

Am****er

The Mobula7 is a really nice little whoop class quad and in my opinion would make a perfect second quad after someone learns the basics with a brushed whoop. I still consider myself a noob in the RC hobby only into it in the past few years after coming back to it after decades. I've acquired a few quads in the last few years, a couple of mini's and a couple of micro's aka tiny whoops. I found that I have the most fun flying the whoops. The one issue a had with the whoops I had was the 1s battery limit and the brushed motors. 1s is fine most of the time zipping around indoors, sometimes I just wanted a bit more power available when flying outside to fight the wind, and when I fly I run through a lot of packs which meant I wore out motors rather quickly. The Mobula7 basically covered both of those issues giving me the option of 1s or 2s for batteries, and brushless motors that will hold up better to just flying about air you wearing out.

Is the Mobula7 perfect? Well nothing is perfect, but sometimes things are pretty close and the Mobula 7 is for me. I still think people wanting to try the hobby should start with a brushed whoop the Mobula7 is the perfect next step for new and casual hobbyists to continue learning the skills and maintenance/repair/tweaking knowledge you'll need for the larger quads.

2019-04-27

R****y

It's very amazing to fly with. But unless you know what you're doing, on how to set it. Good luck trying to fly

2019-04-27

R****y

It's very amazing to fly with. But unless you know what you're doing, on how to set it. Good luck trying to fly

2019-04-27

Am****er

It's very amazing to fly with. But unless you know what you're doing, on how to set it. Good luck trying to fly

2019-02-14

Er****lo

I genuinely can't see furniture. My 40lb brown dog is invisble at 10 ft against a white wall. I ordered 2 and one is just unflyable.

The other drone however is fantastic, and these are perfect for learning if you limit the throttle to half for flying indoors. The seller has reached out and fixed my issue, so I highly recommend this drone as a whoop for flying indoors, with the power to fly outdoors

2019-02-14

Er****lo


I genuinely can't see furniture. My 40lb brown dog is invisble at 10 ft against a white wall. I ordered 2 and one is just unflyable.

The other drone however is fantastic, and these are perfect for learning if you limit the throttle to half for flying indoors. The seller has reached out and fixed my issue, so I highly recommend this drone as a whoop for flying indoors, with the power to fly outdoors