Home>DIY RC Drone Accessories>Happymodel Mobula 7 Mobula7 ​V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair
Happymodel Mobula 7 Mobula7 ​V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair

Happymodel Mobula 7 Mobula7 ​V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair Item NO.: F26464-F26465-F26466-F26467-F26468-F26469-F26470/1+F26679+F24857

5.0
(2)
Write a Review
US$ 75.65
US$ 89.00 Save US$ 13.35 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • Version: Basic Version / Standard Version ( Optional)
  • - The diffirence of them are the package charger.
  • Basic Version: USB Charger
  • Standard Version: 6-way Charger
Product Name Happymodel Mobula 7 Mobula7 ​V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair
Item NO. F26464-F26465-F26466-F26467-F26468-F26469-F26470/1+F26679+F24857
Weight 0.187 kg = 0.4123 lb = 6.5962 oz
Category DIY RC Drone Accessories
Brand Happymodel
Creation Time 2018-11-11

Happymodel Mobula 7 Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair

All props black,if you need other color props,please check here 

https://www.xt-xinte.com/Happymodel-40mm-4-Blade-Propeller-PC-Props-1-0mm-Hole-CW-CCW-for-Mobula7-Mobula-7-FPV-Racing-Drone-Quadcopter-p558025.html

As many users told us this drone fly very fast,but the frame is easily broken,so we off the choice to add the repair tool kit,hope it can help you,thanks!

Please note that All the drones will come with new V2 Frame(Black frame or White frame randomly),the Mobula7 Upgraded Version


Specification: 
Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
   Basic Version: USB Charger
   Standard Version: 6-way Charger

Receiver ( Optional): Compatible Frsky NON-EU Receiver
                                      Compatible Frsky EU-LBT   Receiver  ( XM+ Receiver)
                                      Compatible Flysky AFHDS/ AFHDS-2A Receiver
                                      Compatible DSM2/DSMX Receiver

Size: 98mm*98mm*36mm
Weight: 25.9g (without battery)

Crazybee F3 Pro Flight Controller Item Name: Crazybee F4 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
 
Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard Frsky EU-LBT Version
(External XM+ receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 

Onboard DSM2 / DSMX receiver version

Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
SE0802 16000KV Motor
Model: SE0802
KV: 16000KV
Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Support 1-2S Lipo
 
No.of Cells: 1S Lipo
Propeller
40mm 3-blade Propeller ( 4 CW + 4 CCW)
 

5.8G VTX AIO Camera
 

5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)

700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W )
Weight: 3g
 
Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
 

Features:
- New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Smartaudio ready , change VTX bands, channels via OSD
  DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

Package Included:
Basic Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery

1x Screwdriver 






2019-05-20

Ch****an

I really like this quad. It flies verry well inhouse and outdoor.
On 2s i can do all the tricks (mattyflip , inverted yaw spin and so on) I normally do with my 5 inch quad.
On 1s it fleis very smooth, which is perfect for indoor.

2019-01-29

R****i

Der Mobula7 hat mich von Anfang an begeistert :-)
Siehe Videos:
https://www.youtube.com/watch?v=CSVqK_r8ufU
https://www.youtube.com/watch?v=DdAlHRjgz8Y

Ich habe die FrSky Standardversion bestellt.
2x 250mAh und 2x 300mAh LIPO waren dabei,
aber 450mAh LIPO wäre besser.

Nach dem Happymodel Mobula7 kam der Eachine TRASHCAN, der besser ausgestattet ist. Den hab ich mir auch bestellt.
XT-Xinte hat nun viele Ersatzteile für den Mobula7, die mir alle vom TRASHCAN bekannt sind.

****

The Mobula7 has inspired me from the beginning :-)
See videos:
https://www.youtube.com/watch?v=CSVqK_r8ufU
https://www.youtube.com/watch?v=DdAlHRjgz8Y

I have ordered the FrSky standard version.
2x 250mAh and 2x 300mAh LIPO were there,
but 450mAh LIPO would be better.

After the Happymodel Mobula7 came the Eachine TRASHCAN, which is better equipped. I've ordered that too.
XT-Xinte now has many replacement parts for the Mobula7, all known to me by TRASHCAN.