Home>DIY RC Drone Accessories>Happymodel CINE8 85mm Brushless Cinewhoop DIY Drone Kit SPI Version EX1202.5 8000 KV Motors 4in1 ESC with LiteRadio Remote Control 8CH Radio
Happymodel CINE8 85mm Brushless Cinewhoop DIY Drone Kit SPI Version EX1202.5 8000 KV Motors 4in1 ESC with LiteRadio Remote Control 8CH Radio

Happymodel CINE8 85mm Brushless Cinewhoop DIY Drone Kit SPI Version EX1202.5 8000 KV Motors 4in1 ESC with LiteRadio Remote Control 8CH Radio Item NO.: F42672-D1-A

Write a Review
US$ 122.39
US$ 143.99 Save US$ 21.60 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name Happymodel CINE8 85mm Brushless Cinewhoop DIY Drone Kit SPI Version EX1202.5 8000 KV Motors 4in1 ESC with LiteRadio Remote Control 8CH Radio
Item NO. F42672-D1-A
Weight 0.75 kg = 1.6535 lb = 26.4555 oz
Category DIY RC Drone Accessories
Brand Happymodel
Creation Time 2021-02-06

Happymodel CINE8 85mm Brushless Cinewhoop DIY Drone Kit SPI Version EX1202.5 8000 KV Motors 4in1 ESC with LiteRadio Remote Control 8CH Radio


Note: About the remote control, mode2 left throttle is sent by default, if you need mode1 right throttle, pls leave a message to us, thank you!


Happymodel CINE8 85mm Brushless Cinewhoop DIY KIT 
This Kit is very easy to build , no solder work any more, just assemble then plug and play .  

Very cheap but equipped with high-performance and stable components. The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision. Every FPV pilots could enjoy the fun of building their own FPV Cinewhoop.


Features:
No Solder work need and easy to build
Very reliable and resistant to drops
Stable and smooth flying
Insta360 fixed mount ready 
Smooth and powerful 

Diversity SPI Receiver compatible Frsky/S-FHSS/Redpine protocol


Specifications:
Brand Name: Happymodel
Item Name: Cine8
Wheelbase: 85mm
Size: 145mmx140mmx23mm
Weight: 73g(without battery)
Weight: 99g(with Insta360)
Receiver :
Internal SPI Frsky version (Compatible with Frsky ACCST D8/D16, S-FHSS, Redpine)

Package includes:
Cine8 Frame*1

CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS*1

Happymodel EX1202.5 KV8000 brushless motor*4
Gemfan D51(2020-4) Cinewhoop Props*1
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera*1
5.8G 25mw~400mw Whoop_VTX_HP*1
TypeC USB Adapter*1

Tattu 3S 11.4V 450mah battery*1

FEICHAO LiteRadio remote control*1


Note:Insta360 go is not include.

Motor:
Mode: EX1202.5 KV8000
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
Weight(g):4.4g
No.of Cells(Lipo):2-3S

Propellers:
Material:PC
Weight:0.91g
Pitch:2in
Props Dia:50.3mm
Center Thickness:4.5mm
Center Hole Dia:1.5mm 3 holes

Flight controller:
(Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR
(Redpine SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC

Onboard 4in1 ESC:
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:
CC2500 Hardware
Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol
Channels: 8ch
Failsafe support
Diversity 2.4G receiver system
No ground interference: above 300meter



5.8G 400mw VTX:
Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 
SmartAudio ready

Caddx ANT 1200tvl camera:
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL 
IMAGE: 16:9 or 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)



No related record found