GEPRC Span F405 HD Stack F4 Flight Controller AIO OSD BEC & 50A BL_32 3-6S 4in1 ESC Built-in Current Sensor for DIY DJI Air Unit RC Drone FPV Racing Item NO.: F41174

GEPRC Span 30.5x30.5mm F405 HD Stack F4 Flight Controller AIO OSD BEC & 50A BL_32 3-6S 4in1 ESC Built-in Current Sensor for DIY  DJI Air Unit RC Drone FPV Racing

Specification:
Brand Name: Geprc
Model: SPAN F405 HD Stack
Item Name: F4 Flight Controller & 50A BL_32 4in1 ESC Stack
Size: 36x36mm 
Mounting Hole: 30.5x30.5mm
F405 Flight Controller
MCU: STM32F405
IMU: MPU6000(SPI)
DJI FPV Air Unit Supported. ( Cable connected directly)
BlackBox: 16Mb onboard Flash
Type-C USB interface
OSD: BetaFlight OSD w/ AT7456E chip
Baro: BMP280
BEC Output: 5V & 9V BEC
Integrated LC Filter
Firmware target: GEPRCF405
Size: 36x36mm board, φ4mm with Grommets φ3mm
Power input: 3-6S LiPo 6x UART
Support Frsky XM/XM+/R-XSR; DSM/DSMX; FlySky Receiver; TBS Receiver; Fubata Receiver, AC900 Receiver
50A BL_32 3-6S 4in1 ESC ( Click Here to buy Separate Replace FC)
Input Voltage: 3-6S Lipo
MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A
Burst Current: 55A (5S)
Current sensor: YES
Telemetry: Supported
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
Firmware Version: GEPRC-BL32-4IN1

Features:
- It is a plug-and-play flight controller with F405 chip and a tower flight system with BL_32 50A 4in1 32bit electrical modulation.
- It integrates 16Mb black box, MPU6000 gyroscope and barometer for a more delicate hand experience.
- Supports direct insertion into DJI Digital FPV System, which can avoid the trouble of welding.
- Upgrade the USB interface of Type-C, greatly improve the life of the socket and reduce the risk of bad contact.
- Supports all kinds of receivers, including Sbus,PPM,CRSF,DSMX,iBus, DUMD and so on.

Package Included:
1x GEP-F405-HD Flight Controller
1x GEPRC G50A ESC
1x 35V 470uf  Capacitor
4x M3*22mm Screw
4x M3*30mm Screw
1x XT60 Power Cable
1x ESC Cable
1x Cable for Connecting to DJI Module
4x Silicon grommets M4 to M3