Home>DIY RC Drone Accessories>Flight Control>GEPRC STABLE 12A/20A Whoop Stack F4 Flight Controller FPV Crossing Machine Flight Tower for RC FPV Whoop Toothpick Quadcopter Drone
GEPRC STABLE 12A/20A Whoop Stack F4 Flight Controller FPV Crossing Machine Flight Tower for RC FPV Whoop Toothpick Quadcopter Drone

GEPRC STABLE 12A/20A Whoop Stack F4 Flight Controller FPV Crossing Machine Flight Tower for RC FPV Whoop Toothpick Quadcopter Drone Item NO.: F38795 F38796

Write a Review
US$ 43.34
US$ 50.99 Save US$ 7.65 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name GEPRC STABLE 12A/20A Whoop Stack F4 Flight Controller FPV Crossing Machine Flight Tower for RC FPV Whoop Toothpick Quadcopter Drone
Item NO. F38795 F38796
Weight 0.03 kg = 0.0661 lb = 1.0582 oz
Category DIY RC Drone Accessories > Flight Control
Brand GEPRC
Creation Time 2020-06-03

GEPRC STABLE 12A/20A Whoop Stack F4 Flight Controller FPV Crossing Machine Flight Tower for RC FPV Whoop Toothpick Quadcopter Drone


Specification

Crazy, tiny indoor through the machine must fly control, indoor through the machine into the 4S battery era.
After a long time of research, STABLE 12A Whoop Stack finally came out, the maximum support 4S battery, perfect use of 1103-1105 motor, F4 flight control chip can complete the required operation, MPU6000 gyroscope to ensure the hand, with OSD adjustable parameters, very convenient, very light weight, is the indoor traverser of the choice.Coupled with a 200mW map transmission specifically designed for Whoop classes and toothpick racks, it has stable signals, clean graphics, and light weight.Easy to use.
 
 
GEP-12A-F4 Flight contorller:
Model Name:GEP-12A-F4
MCU: STM32F411
IMU: MPU6000 gyro/accelerometer (SPI)
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@1A
Integrated LC Filter
Firmware target: GEPRCF411
Installing Hole: 25.5×25.5mm, M2
ESC MCU: BB21F16G
Continuous current: 12A/20A(Optional)
Input:2-4s lipo
Supports Dshot600 ,Oneshot,Multishot
Current meter: 210
Target: G_H_30
12A Size: 28.5×28.5mm board,25.5mm mounting holes (M2)
20A Size: 32×32mm board,25.5mm mounting holes (M2)
 
VTX Specifications:
Model Name:GEP-VTX200-Whoop
Item name: 25~200mw 48CH VTX FPV Transmitter
Output power: Pit/25/100/200mw switchable
Channels: 48CH
Input voltage: 4.5V–5.3V
Current consumption: 300mA(type)
Antenna: RG178 antenna U.FL interface
Frequency: 5.8GHz 5bands 48 channels With Raceband
Video Format:PAL/NTSC
Control protocol:IRC Tramp
Weight: 2g without antenna
 
Receiver Support:
Frsky XM/XM+/R-XSR
Futaba Receiver
DSM/DSMX
FlySky Receive
TBS Crossfire Receiver
AC900
Most receivers that support SBUS
 

 

 

Include:
– 1 x GEP-12A-F4 or GEP-20A-F4Optional
– 1 x GEP-VTX200-Whoop
– 1 x Power cable
– 8 x screw
– 4 x Soft silicone




No related record found