Home>DIY RC Drone Accessories>ESC>GEPRC GEP-Mark3 Mark3 H5 225mm Freestyle FPV Racing Drone PNP BNF with SPAN F4 Flight Controller 40A/50A ESC 48CH 5.8G VTX+Caddx Ratel 2.1mm FPV Camera
GEPRC GEP-Mark3 Mark3 H5 225mm Freestyle FPV Racing Drone PNP BNF with SPAN F4 Flight Controller 40A/50A ESC 48CH 5.8G VTX+Caddx Ratel 2.1mm FPV Camera

GEPRC GEP-Mark3 Mark3 H5 225mm Freestyle FPV Racing Drone PNP BNF with SPAN F4 Flight Controller 40A/50A ESC 48CH 5.8G VTX+Caddx Ratel 2.1mm FPV Camera Item NO.: F30221/F30222/F30223/F30224

Write a Review
US$ 234.39
US$ 275.75 Save US$ 41.36 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name GEPRC GEP-Mark3 Mark3 H5 225mm Freestyle FPV Racing Drone PNP BNF with SPAN F4 Flight Controller 40A/50A ESC 48CH 5.8G VTX+Caddx Ratel 2.1mm FPV Camera
Item NO. F30221/F30222/F30223/F30224
Weight 0.56 kg = 1.2346 lb = 19.7534 oz
Category DIY RC Drone Accessories > ESC
Brand GEPRC
Creation Time 2019-07-17

GEPRC GEP-Mark3 Mark3 H5 225mm Freestyle FPV Racing Drone PNP BNF with SPAN F4 Flight Controller 40A/50A ESC 48CH 5.8G VTX+Caddx Ratel 2.1mm FPV Camera

Brand Name: GEPRC
Product model: Mark3 H5
Flight Control Firmware: betaflight_3.5.3_OMNIBUSF4SD
Paddle: GEP5040*3 (10 pairs)
Antenna: Pagoda2 RHCP antenna
Weight: 321g without battery or props
Receive: Without receiver /Frsky R-XSR
Rack: GEPRC GEP-Mark3
Carbon fiber sheet: full 3K twill carbon fiber
Aluminum alloy parts: high precision 7075 aluminum cutting
Wheelbase size: 225mm
Base plate: 3mm
Top plate: 1.5mm
Side panel: 3mm
Reinforcement splint: 1.5mm
Arm: 4mm
 
Power configuration version:
1. Flying tower: SPAN F4 BLheli_S 40A flying tower
MCU: STM32F405
MPU: MPU6000
ESC: 40A * 4 BLHeli_s (Dshot 150/300/600) Support 2~5S LiPo
Image: 5.8GHz (48 channels IRC Tramp default UART3)
(PIT/25/200/400/600mW)
Motor: GR2207.5 2400KV

2. Flying tower: SPAN Pro F4 BLheli_32 50A flying tower
MCU: STM32F405
MPU: MPU6000
ESC: 50A * 4 BLHeli_s (Dshot 150/300/600/1200) Supports 3~6S LiPo
Image: 5.8GHz (48 channels IRC Tramp default UART3) (PIT/25/100/200/600/800mW)
Motor: GR2207.5 1920KV
 
You also need the following equipment to fly:
Remote control: you can choose, like the Frasky X9d
Video glasses: such as FatShark V2
Battery: SPAN F4 40A Tower recommends using 4S 1300~1550mAh battery
SPAN Pro F4 BL32 50A Tower is recommended to use 6S 1050~1300mAh battery
Feature introduction:

GEP-Mark3 H5 frame, full 3K carbon fiber board with high precision CNC protection, beautiful and sturdy
2 power version options
Use SPAN F4 40A Tower, up to 5S battery, with GR2207.5 2400KV motor
Use SPAN Pro F4 BL32 50A Tower, up to 6S battery, with GR2207.5 1920Kv motor
With the newly designed GR2207.5 high performance motor
Equipped with GEP5040 paddle and motor seat 3D print
Use Pagoda2 antenna to ensure the receiving strength of the signal
Caddx's Ratel lenses for superior imaging
The PID is carefully debugged by the GERPC Flying Team, and the BNF version can be shipped from the factory.

contain:
1x Mark3 BNF/PNP kit
10x GEP5040-3 propeller
5x battery cable tie
1x spare arm
4x 3D printing motor block protection
2x Pagoda2 antenna

Receiver (only included in the BNF version): Frasky R-XSR


No related record found