Flycolor 30.5x30.5mm Raptor S-Tower F4 OSD Flight Controller 40A BL_S DShot600 ESC For RC Models Racing Drone Item NO.: F25000

Flycolor 30.5x30.5mm Raptor S-Tower F4 OSD Flight Controller 40A BL_S DShot600 ESC For RC Models Racing Drone

ESC

MCU: EFM8BB21F16G MCU, 8-bit C8051 core, operating frequency up to 50MHz;

Dedicated high-speed driver IC, start more comfortable. ESC supports up to 500,000 rotation speeds;

ESC firmware: BLHeli-S, A-H-30;

Minimalist two-story tower structure; Fast pin connection between ESC and flight control, double signal transmission with double insurance, improving flight stability;

The ESC comes with a current meter and does not require any additional connection to display real-time current directly on the OSD.

The ESC uses BLHeli-S firmware, which enhances superior performance for multiple rotors. The hardware-generated motor PWM improves smooth throttle response and reduces noise.

The ESC automatically detects the throttle signal on power-up, supports the pulse width input of 1-2ms for the normal throttle mode, and supports oneshot125, oneshot42 and multishot signals;

Full support for Dshot150, Dshot300, and Dshot600. Dshot is a digital signal, strong anti-interference ability, and the ESC does not need to calibrate the throttle stroke.

 Flight Control

MCU: STM32F405;

Gyro: MPU-6000 SPI;

Flight Control Firmware: OMNIBUSF4SD;

Support PPM, SBUS, SPEKTRUM1024/2048 and other types of receivers;

Supports up to 32G TF card expansion, allowing users to store more flight data

Flight Control Integrated OSD can use BetaFlight software to adjust OSD parameters;

Flight Control integrates 3.3V, 5V, 12V and battery voltage (VBAT) to provide power for peripherals such as receivers, video transmissions, cameras, buzzer, and LED lights;

All plugs are equipped with quick-connect cables to support the mainstream camera, picture transmission and other equipment; to give you an unprecedented installation experience;

Mounting hole: 30.5x30.5mm.