Eaglet-85 85MM Carbon Fiber DIY FPV Camera Micro Brushless Racing Quadcopter Drone with Frsky/Flysky/DSM-X WFLY RX Receiver

Eaglet-85 85MM Carbon Fiber DIY FPV Camera Micro Brushless Racing Quadcopter Drone with Frsky/Flysky/DSM-X WFLY RX Receiver Item NO: F21954-F21955-F21956-F21957-F21958-F21959

US$ 101.00 (15% Off)
US$ 118.82 Save US$ 17.82
type:
Frame kit Only PNP No RX BNF DSM X RX BNF FRSKY RX BNF FLYSKY RX BNF WFLY RX
Quantity:
Shipping Cost:
Estimate Shipping Cost
Product Name Eaglet-85 85MM Carbon Fiber DIY FPV Camera Micro Brushless Racing Quadcopter Drone with Frsky/Flysky/DSM-X WFLY RX Receiver
Item NO F21954-F21955-F21956-F21957-F21958-F21959
Weight 0.2100 kg = 0.4630 lb = 7.4075 oz
Category FOR SALE > Promotion on Auguest
Brand XT-XINTE
Creation time 2017-08-15

Eaglet-85 85MM Carbon Fiber DIY FPV Camera Micro Brushless Racing Quadcopter Drone with Frsky/Flysky/DSM-X WFLY RX Receiver


Kindly Note: The Frame Kit not include any Electronic Spare 

parts, Unassembly Kit.


PNP Include 1x 2S 500AMH Battery, But no Charger. Not include the Transmitter. Assembly Set.


Frame Kit  (Picture reference, Product do not include the Flight controller)
Brand Name: JMT
Item name:Eaglet-85 FPV Racing Frame 
Wheel base: 85mm
Material: Carbon fiber, PLA+TPU
Weight: about 22g
Size: 113mm * 113mm * 52mm; Protection plate Thickness: 1.5mm; Buttom Plate Thickness: 2mm
Recommend flight components: 2S Power; 20*20 Flight Controller; 11 Series Motor
 
Note: This is the frame only, package doesn't include other components needed for flight

Assembly Set Specification:

Item name: Eaglet-85 FPV Racing Drone
Product number:950085
Wheelbase: 85mm
Size:113mm * 113mm * 52mm
Weight: about 60g (without battery)
Motor:1104 7800KV brushless motor
ESC: 10A BLHELI_S 16.5 2-3S 4in 1  ESC Dshot600Propeller: 56mm 2-blade propeller
Camera: 600TVL camera with 25MW 48CH NTSC/PAL vedio transmitter
Flight controller: Minicube Betaflight F3 6DOF built-in OSD
OSD: Betaflight OSD
Firmware of FC: Betaflight 3.1
Flight time: 3-5 mins
Buzzer: 13*13mm (with LED)
Battery: 7.4V 500mah 50C lipo battery

Minicube F3 6DOF flight controller:
Size:27mm * 27mm * 5mm
Mount hole:20mm * 20mm
Processor:STM32 F303 MCU
Sensor:SPI sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Artificial Horizon, Fly mode, Flytime, Craft name etz.)

Firmware version:OmnibusF3 Betaflight 3.1 Dshot
 
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
Size:27mm * 27mm * 5mm
Mount hole:20mm * 20mm
Firmware version:BLHELI_S 16.5
BB2,48MHZ chip
Lipo Battery:2-3S
Con. Current:10A
Peak Current:15A(10S)
BEC:5V 1A
Programming:Yes
Betaflight passtrough ready
Dshot600 ready(Default)
Support onehot42 onehot125 Multishot Dshot
Damped light on

Features:
Streamlined desigh
Props protection
Light frame
STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
Adjustable Angle of camera 
Figure transmitting antenna protection
Support Cleanflight / Betaflight firmware
Acro mode / Air mode /Angle mode support 
Built-in OSD,Through BETAFLIGHT regulate OSD information
Can adjust the PID parameters by remote control
BLHELI_S electronic speed controller firmware
Support telemetry RSSI return

Eaglet-85 COMBO:
1 x Eaglet-85 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
4 x 1104 7800KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 2-3S 4 in 1 ESC Dshot600
2 x 48mm 5-blades propeller(CW)
2 x 48mm 5-blades propeller(CCW)
1 x vm275t 25mw 48CH fpv camera

1 x 7.4V 500mah 50C LIPO battery

1* Receiver (DSM-X/Flysky/Frsky/WFLY optional)


Package size:15*15*5cm

Package weight:130g


Note: Frame kit not include any electronic parts.


No related record found

You May Also Like