DUMBORC X6YC / X6YCG 2.4G 6CH Radio Control System Receiver for DUMBORC X6 Transmitter RC Nitro Car Control Part

Descriptions:

1. Multi function: the 3CH and 4CH of the remote controller can be connected to the conventional steering gear; Light control module; It can also control 5V electromagnetic coupler; It can control 5V lamp (cooling fan, water pump) to realize on-off; It can control the on-off of one circuit of motor; Players can play their imagination and add more functions. In short, the 3-pin row pins, signal lines and positive and negative electrodes of 3CH and 4CH can be controlled independently. It can output PWM signal and 5V switching signal.
2. Oil engine function: when the conventional receiver and the remote control are out of control, the receiver defaults to the neutral point. Although the electric or oil model will not output power, due to inertia, the car will still run forward until the speed slowly drops down and then stop. Most players still accept this. After all, the car won't get out of control. But some players think, why not make it stop immediately after braking? This oil engine receiver can set the throttle of the oil engine, the position of the steering gear can be defined by itself, and the electric adjustment signal can set the braking state.
Difference of X6YC / X6YCG receiver：
X6YCG Receiver integrated gyroscope ensures that the model is in line to prevent tail flick and rollover. Support gyroscope sensitivity adjustment.
Specifications:

Colour: Black

Channel: 6CH

Model: car/boat/tank

Modulation mode: GFSK

Spread Spectrum: FHSS

Control distance: 400 meters or more

Voltage range: 4.8-10V

Compatible: X6 transmitter

Product size: 35*20*13mm, antenna length 106mm