DIATONE MAMBA F722 MK3 F60 PRO MPU6000 F7   Flight Controller 60A BLHELI32 4in1 ESC 3-6S  Stack for FPV RC Drones

Note： Please pay attention to the version of the product you purchase

MAMBA STACK F722 MK3 60A 6S 32BIT (NO WIFI)

The  upgrade:

• Add I2C function

• When you connect the USB, the receiver and OSD settings can be

• The pad area of the Mini flight controller (20×20) increased by 140%

• LED signal selection (when Mamba Led sys avaiable)

• BEC short circuit protection

• TVS instant high voltage protection 30V
• Upgrade the anti-interference cable

• Use Typec(Most)

Product description:

Flight control: F722 MK3
MCU: 216MHz STM32F722RET6
IMU: MPU6000
Barometer: Yes
OSD: Yes
Black box: 16M Flash Memory
Number of serial ports: 6Set
Program: Dshot300/600/1200
ESC return: Yes
Flight control status indicator: Yes
LED control switch: BF LED/MB LED (4 Set 2812 LED)
F.Port: Yes
RSSI: Yes
Buzzer: Yes
Input voltage: 3~6S Lipo (12.6~25.2V)
TVS power protection: Yes
BEC: 3.3V 0.5A& 5V 3A (system power supply)
           &5V 3A (LED independent power supply) & 9V 3A
Mounting hole position: 30.5mm/M3


ESC: F60 PRO
Input voltage: 3~6S Lipo (12.6V~25.2V)
Output current: 60A×4
Peak current: 75A (10S)
BEC: No
Firmware: MAMBA F60PRO
SOFT: Dshot300/600/1200
TVS power protection: Yes
Mounting hole position: 30.5mm/M3



Supply:
High frequency 470uF/35V ×1
8pin sh1.0 ×2
12AWG 100mm ×2

AMASS Original XT60

Flight control: F722 MK3