Crazybee F3 Pro Flight Controller with 5.8G 700TVL 40CH 25mW FPV Camera 5A 1-2S Compatible Frsky Receiver for 2S Brushless tiny whoop Mobula7 Mobula 7 FPV Racing Drone

Copy and share this link on social network or send it to your friends

Copy

Crazybee F3 Pro Flight Controller with 5.8G 700TVL 40CH 25mW FPV Camera 5A 1-2S Compatible Frsky Receiver for 2S Brushless tiny whoop Mobula7 Mobula 7 FPV Racing Drone Item NO.: F26255-A

US$ 49.45
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Estimate Shipping Cost
  • Crazybee F3 Pro Flight Controller with 5.8G 700TVL 40CH 25mW FPV Camera 5A 1-2S Compatible Frsky Receiver for 2S Brushless tiny whoop Mobula7 Mobula 7 FPV Racing Drone

Product Name Crazybee F3 Pro Flight Controller with 5.8G 700TVL 40CH 25mW FPV Camera 5A 1-2S Compatible Frsky Receiver for 2S Brushless tiny whoop Mobula7 Mobula 7 FPV Racing Drone
Item NO. F26255-A
Weight 0.03 kg = 0.0661 lb = 1.0582 oz
Category DIY RC Drone Accessories > Mobula7 Upgrade Parts
Brand Happymodel
Creation Time 2019-02-23

Crazybee F3 Pro Flight Controller with 5.8G 700TVL 40CH 25mW FPV Camera 5A 1-2S Compatible Frsky Receiver for 2S Brushless tiny whoop Mobula7 Mobula 7 FPV Racing Drone


Package include:

1 x CrazybeeF3FR PRO flight controller

2 x Power cables

1 set Shock absorbing rubber and screws

1x 5.8G 700TVL 40CH 25mW FPV Camera


CRAZYBEEF3 PRO FR Compatible Frsky Receiver

Flight controller

CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR

MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM

Weight:4.2g
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready

Heading LED Ready

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Built-in

Frsky NON-EU receiver

SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m


The world first 1-2S Brushless F3 flight controller with internal 4in1 ESCOSD2.4G receiverCurrent sensorBuck / Booster is coming. You only need to add a VTX and Camera . It’s a best choice for 2S Brushless tiny whoop.

 




No related record found