Home>Consumer Electronics>Computer Accessories>COOLMOON 120mm Adjust RGB Computer Case PC Cooling Fan Quiet Fan Blade with IR Controller Computer Cooler RGB CPU Case Fan
COOLMOON 120mm Adjust RGB Computer Case PC Cooling Fan Quiet Fan Blade with IR Controller Computer Cooler RGB CPU Case Fan

COOLMOON 120mm Adjust RGB Computer Case PC Cooling Fan Quiet Fan Blade with IR Controller Computer Cooler RGB CPU Case Fan Item NO.: F38903-A

Write a Review
US$ 7.10
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name COOLMOON 120mm Adjust RGB Computer Case PC Cooling Fan Quiet Fan Blade with IR Controller Computer Cooler RGB CPU Case Fan
Item NO. F38903-A
Weight 0.39 kg = 0.8598 lb = 13.7568 oz
Category Consumer Electronics > Computer Accessories
Brand COOLMOON
Creation Time 2020-07-11

COOLMOON 120mm Adjust RGB Computer Case PC Cooling Fan Quiet Fan Blade with IR Controller Computer Cooler RGB CPU Case Fan


Note: This Fan and Controller can only be used with COOLMOON products,pls carefully choice before buying.

Features:
1: LED Ring Fan.
2: RGB Light shows vivid visual effect.
3: RF Wireless operates speed,mode and color.
4: High Quality & Long Using Life: With hydraulic bearing design, ,PC case fan is in high quality and has a using life up to 30,000 hours continuous working time.
5: Wide Compatibility: PC case fan is compatible with all types of chassis and easy to install.

Parameters:
Operating Voltage: 12V+5V
Rated Power: 4.2W
Current:0.23A
Rated Current: 0.19A
Airflow: 37.8cfm
Fan Speed:0-1200(+/-10%) RPM
Sound Level:25 dBA
Connector: mini 6 pin connector/4 Pin connector
Bearing Type: Hydraulic Bearing
colour:RGB
Material:ABS
size:Product Dimension: 120mmx 120mmx 25mm

w/ Standard Controller Package list:
1* Fan
1* Fan controller
1* Remote control
1* Power line

Note: 
Separately use a power supply 4PIN interface to power the controller, do not connect other devices in series. The 4PIN connector of the power supply cable must be plugged in firmly only after the power is off, and the other end should be plugged into the red connector on the left side of the controller, and then turn on the host to supply power.

Do not insert the wrong power supply port of the controller, otherwise it will be short circuit and burn out! Do not hot plug the controller with power on to supply power!


No related record found