BGNING Aluminum Alloy Dual Handheld Diving Adjustable Bracket Kit for GOPRO for DJI and other sports cameras, micro-single, SLR camera waterproof case, including Canon, Sony, Nikon, Panasonic, Olympus etc..
Many options, please choose the one you want, contact me if any problems.
Product gross weight: about 655g, net weight about 590g
Packing size: 280*66*66mm
Product material: aluminum alloy + stainless steel + silicone
Color: black and red. (support custom, has MOQ)
Minimum outer dimensions of the product: 278*195*55mm
Product outer dimension width stretching range: 278~385mm
Dual handheld installation board size: 220*55mm;
Designed with a vertical and horizontal mounting slot to secure the waterproof case or camera;
The size of the waterproof case can be installed:
the maximum distance between the two fixing screw holes is 166mm wide, so the mounting screw hole of the waterproof case must be smaller than 166mm.
One screw hole also can be installed.
This dual-handheld is optimized on the basis of the previous generation products, modified the shortcomings of the previous products, and then gave the professional enthusiasts the experience feedback, and further modified the dual-handed diving photography accessories.
Features:
1. The handles on both sides of the product are hollowed out, which not only reduces the weight, but also plays a key role in the comfort and slip resistance of the grip;
The handle is designed into a two-step structure according to the comfort of the human hand, so that when the handle is held by the hand, the index finger is on the first step, the middle finger and the little finger are on the second step, and there is neither a cutting hand nor a natural grip;
When you hold it hard, you can fully appreciate the fullness of your hands, and the force acts on the handle;
The handle height is also relatively high to 130mm, so that the hand will not be squeezed in a small space; there is a one-inch ball head above the handle, the ball head can expand the equipment according to their needs, such as fill light, Extension arm, buoyancy lamp arm, etc.;
2. The link between the two hand-held mounting plates and the handle is a card slot pull type, which is locked by an M5 screw, and the length of the single side stretch is 53 mm;
The purpose of the card slot drawing is that when there are heavy objects on the platform, the two card slots and the M5 screw can be lifted in a 3-point manner, so that it can withstand heavier weight without damage;
In use, it is only necessary to tighten a screw to adjust;
3. The dual-hand-held mounting plate is designed with a vertical and horizontal mounting slot for camera housing accessories. The four horizontal slots on the board can be mounted on the front or the back as needed, adapting to different specifications of the camera equipment, with the shutter extension rod.
There are two M5 screw holes on one end of the board. If the customer is worried that the left and right screws are not tight, you can install two screws.
No related record found