BETAFPV X-Knight 5 Inch 6S Racing Quadcopter (HD Digital VTX) F4 AIO 35A ESC Transmission System Toothpick Crossing FPV RC Drone

X-Knight 5'' FPV Toothpick Quad and X-Knight 5'' Toothpick Quad  (HD Digital VTX) Optional , check carefully before place the order.

X-Knight 5'' FPV Toothpick Quad

Package

1 * X-Knight 5'' FPV Toothpick Quad

1 * Gemfan 5125 3-Blade Props

1 * Set of M2*8 Titanium Alloy Screws

X-Knight 5'' FPV Toothpick Quad is the first Sub-250g 6S FPV racing drone on the current market! It is ultralight 144g still below 250g with the battery, perfectly meet the current requested of FAA rules, make your flight easier without limitation. Equipped with 35A AIO FC and 550mAh 6S battery(not including), this toothpick quad is sure to give you that boost and performance you are looking for! 

Bullet Point

X-Knight 5'' Quad is the first lightweight 6S racing drone released on BETAFPV. It is ultralight only 144g, which is below 250g even with the battery, perfectly meet the current requested of FAA rules, make your flight easier without limitation.

It is the first BETAFPV racing drone that installs the F4 35A AIO FC! This FC supports a 6S power system and up to 35A continuous currents, brings the pilots an excellent racing flight experience. 

Equipped with 1805 1550KV motors and Gemfan 5125 propellers, X-Knight 5'' offers unparalleled execution in thrust and efficient control.

Highly recommended for the 550mAh 6S battery, it will give your drone more power and speed.

Assembled New V2 version of 5'' frame kit, which adopts T800 carbon fiber material becomes ultimate durability while maintaining minimal weight 26.44g.

Specification

Item: X-Knight 5'' FPV Toothpick Quad

Weight: 144g (without battery)

FC&ESC: F4 35A AIO Brushless FC

Motors: 1805 1550KV Brushless Motors

Props: Gemfan 5125 3-Blade props

Camera: Caddx Baby Ratel Camera

VTX: M02 5.8G VTX

Battery: 550mAh 6S 75C battery

Frame: X-Knight Carbon Fiber 5'' V2 Frame Kit

Canopy: Canopy for Mini Camera V3

Receiver Option: Frsky XM+  / DSMX / Futaba S-FHSS / TBS Crossfire

Flight Controller

Toothpick 35A AIO Brushless FC- The board is the first BLHeli_32 ESC 35A All-in-one toothpick FC on the current market. It can handle 35A continuous current(40A burst) and provide with massive levels of performance capability, but it still maintains ultralight only 7g. In addition, this board supports 2-6S Lipo battery, perfectly suitable for the 4''-5'' toothpick drone. 

Motors

1805 1550KV Brushless Motors is a lightweight motor that is best for 6S power. It only weights 16.1g for 1pc. Best matched with the Gemfan 5125 3-Blade props, the motor is very efficient in use and has an excellent racing flight experience. Combined with Toothpick 35A AIO Brushless FC, it will provide you enough output power.

M02 5.8G VTX

M02 5.8G VTX board is a high-quality 5.8GHz VTX has 4 adjustable power including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. 

Only weight 1.7g.

Smart Audio function is included

Frequency: 5.8GHz 6 bands 40 channels

Caddx Camera  

The Caddx Baby Ratel has superb night vision performance in addition to an excellent daytime image with ultra-low latency. Latency is ultra-low at only 8ms. It is lighter but still maintains a high quality 1/1.18" HDR sensor, which provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. 

Image Sensor: 1/1.8 Inch starlight HDR sensor       

Horizontal Resolution: 1200TVL

FOV: 160 Degree

Min. Latency: 8ms

TV System: NTSC & PAL (changeable)

Image: 16:9 & 4:3 (changeable)

WDR: Super WDR (HDR)

Min. Illumination: Starlight 

Synchronization: Internal 

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio:  >60dB (AGC OFF)

Video Output: CVBS

Camera OSD: Separate OSD

DNR: 3-DNR

X-Knight Carbon Fiber 5'' Frame V2 Kit

Our first assembled 5'' frame kit, which adopts T800 carbon material becomes ultimate durability while maintaining minimal weight 26.44g. It consists of arms, bottom plate and top plate, which allows you to replace the damaged part. Meanwhile, the top plate comes with press nuts to make the installation process easier.

X-Knight 5'' Toothpick Quad  (HD Digital VTX)

Package

1 * X-Knight 5'' Quad (HD Digital VTX)

1 * HQ 5025 3-Blade Props(2CW+2CCW)

1 * Set of M2*7 Screws

]X-Knight 5'' Toothpick Quad (HD Digital VTX) is the first ultralight 6S toothpick drone with HD digital VTX released on BETAFPV! With this vista kit, pilots can get a long transmission range with stable and clear HD video. Featured with F4 35A AIO FC, brand-new 2004 motor, and HQ 5025 props, this toothpick drone is made in its best condition with insane flight power, supporting all kinds of FPV freestyle tricks, you will have fun with it!

Bullet Point

X-Knight 5'' Toothpick Quad (HD Digital VTX) equipped with Caddx Vista VTX, which can record 720P 120fps video. With this vista kit, the max range is up to 4 km, pilots can get a stable and clean HD video on the flight.

Equipped with BETAFPV brand-new 2004 1700KV motors and HQ 5025 propellers, X-Knight 5'' HD Digital VTX can be flight powerful, it supports kind of FPV freestyle tricks.

X-Knight 5'' Toothpick Quad (HD Digital VTX) is an ultralight 176.8g 6S toothpick drone. With the lightweight, this toothpick drone is made in its best condition with insane flight power.

Using 5'' toothpick frame V2 version, which adopts T800 carbon fiber material becomes ultimate durability while maintaining minimal weight 26.44g.

Highly recommended using the 550mAh 6S battery, it will give your drone more power and speed.  X-Knight 5'' HD Digital VTX can get 11 min smooth flight or 4min flight of FPV freestyle tricks with this battery.

Specification

Item: X-Knight 5'' Quad(HD Digital VTX)

Weight: 176.8g (without battery)

Power system: 6S

FC&ESC: F4 35A AIO Brushless FC

Motors: 2004 1700KV Brushless Motors

Props: HQ 5025 3-Blade Props

HD Digital Camera & VTX: Caddx Vista

Battery: 550mAh 6S 75C Battery (Not included)

Frame: X-Knight Carbon Fiber 5'' V2 Frame Kit（T800）

Canopy: Canopy for Mini Camera V3

Receiver Option: Frsky FCC/Frsky LBT/TBS/PNP

Flight time: 11min smooth flight or 4min flight of FPV freestyle tricks with 550mAh 6S battery

Flight Controller

Toothpick F4 35A AIO Brushless FC - The board is the first BLHeli_32 ESC 35A All-in-one toothpick FC on the current market. It can handle 35A continuous current(40A burst) and provide with massive levels of performance capability, but it still maintains ultralight only 7g. In addition, this board supports a 2-6S Lipo battery, perfectly suitable for the 4''-5'' toothpick drone. 

Caddx Vista

The Caddx Vista HD digital video transmitter can work with DJI FPV camera, goggles, and remote controller. The total weight (with camera and antenna) is 35g only, about 20g lighter than the DJI FPV unit. Besides, it is smaller and designed to suit for whoop drones. With this vista kit, the max range is up to 4 kilometers. BETAFPV mini canopy V3  is suitable for the Caddx Vista greatly. With injection molded process and PE material. The canopy will perfectly protect the Caddx Vista camera.

Motors

2004 1700KV Brushless Motors is a lightweight 6S motor. It only weights 16.4g / 1pc. Best matched with the HQ 5025 3-Blade Props, the motor is very efficient in use and has an excellent racing flight experience. Combined with Toothpick 35A AIO Brushless FC, it will provide you enough output power.

X-Knight Carbon Fiber 5'' Frame V2 Kit

X-Knight Carbon Fiber 5'' V2 Frame Kit - Our first assembled 5'' frame kit, which adopts T800 carbon material becomes ultimate durability while maintaining minimal weight 26.44g. It consists of arms, bottom plate, and top plate, which allows you to replace the damaged part. Meanwhile, the top plate comes with press nuts to make the installation process easier.