BETAFPV VR01 FPV Goggles with 4.3 inch 800*480px HD High Brightness LCD 5.8G Antennas 3.7V/2000mAh Battery Support TFCard(C10)Max32G for FPV racing or Model Airplane.
BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inch 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like as cotton and suitable for all age ranges.
Bullet Point
BETAFPV VR01 FPV Goggles is with 4.3 inch 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplane.
Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head
perfectly.
Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.
Come with advanced auto-searching function and show yout the working frequency on screen.
92% transparent lens adopted ,no distort,no blur on the adage of screen.
Light weight 375g with 2hr 2000mAh battery, RTF for any scale, racing, Model airplane game.
Specification
BODY
Dimension: 155x144x113mm
Weight: 375g with 2hr 2000mAh battery
Belt: three-Ways adjustable belt
SCREEN
screen size: 4.3 inch
Screen resolution: 800*480 (No blur after enlarge by the lens)
Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 12 O’CLOCK
LENS
2.8x boost of the video to acquire intense feel-in-there video
92% transparent rate no distort of light
JACK
Input CVBS
Headphone sound output
TFCard(C10)Max32G
USB DC5V IN,the device operating current of 550mA@5V,built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment
BATTERY
Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is
completed, here are bright green LED
Each full charge revive is around 2 hours working time
Band and Channel Selection
Operation Instructions
KEY
K1>SearCH/AV
Default mode, Short press for automatically search signals to a certain signal strength and stops on that channel; Long press switch RF MOD and Long press for AV MOD; In Play mode, pressed jump volume adjust OSD.
K2>MENU/Power
Default mode, Short press for MENU OSD; Long press 3S for Power OFF/ON; MENU pressed, this button is use as the Return.
K3>REC/Play/OK
Default mode, Short press for recording /STOP; Long press for Play mode; MENU pressed, this button is use as the confirmed.
Band+/VOL+
Default mode, Short press for Band+ option A,B,D,E,F,R cycle selection; Long press for Volume control -; MENU pressed, this button is use as the UP.
K5>CH+/VOL-
Default mode, Short press for CH 1~8 cycles; Long press for Volume control +, MENU pressed, this button is use as the DOWN.
PLAYBACK
Call MENU and select Playback (Short Press K1 button to call menu, and use K3 button to select Playback mode; Or long pressed K3 )
Review/Replay in Playback mode (Playing Short K1 jump volume adjust OSD)
Buttons have different function in playback mode
Record file: AVI, 800*480px progressive
Support up to 32G TF card (C10 recommend)
K2: Playback menu (volume control/file delete/protect)
K4: UP/ fast backward<<
K5: DOWM/ fast backward>>
K3: Select/Play/ Pause
K1: Quit Playback mode
NOTE: If the device is not used for a long time, please charged once every four months, inorder to protect the battery.
Package contains:
1 * BETAFPV VR01 FPV Goggles
1 * USB Charging Cable
2 * Dipole 5.8G Antennas
1 * Adjustable Headband
No related record found