Betafpv 1s Indoor Racing Crossing Machine Toothpick drone 4-axis Aircraft HX100 SE BT2.0 RC Drone Quadcopter Frame

Package

1 * HX100 SE FPV Quad

1 * BT2.0 300mAh 1S Battery

1 * BT2.0-PH2.0 Adapter Cable

Ultralight, quiet and powerful! With the tiny design of a 100mm wheelbase and the BT2.0 300mAh 1S battery, this small body contains incredible energy! Come with the brand-new F4 1S AIO FC, which integrates the VTX, greatly saves the drone's weight, brings a fast flight experience. This little beast will bring you an unprecedented outdoor flight experience!

Bulet Point

Uses the lightest F4 1S Brushless AIO FC which weighs 3.8g without a cable. This FC has the efficient STM32F411CEU6 processor and tuned BETAFPVF411(BEFH), which allows for maximum weight savings.

Equipped with BetaFPV’s exclusively designed BT2.0 connector, it can support 9A continuous current and 15A burst while the PH2.0 connector uses 4.5A continuous current

The highly efficient combination of the light 1102 13500KV motor and durable 65mm 2- blade props deliver a drone with excellent flight performance and achieves a great noise-reducing function

Super light with a total weight of 28.09g, installed with the customized HX100 SE carbon fiber frame

The drone comes with BT2.0 - PH2.0 adapter cable in default, which is convenient for customer who uses PH2.0. We also released the BT2.0 tester and charger, its charging current has been upgraded from 0.5A to 1A, which makes the charging speed 2 times faster.

Specification

Item: HX100 SE FPV Quad

Weight: 28.09g (without battery)

FC&ESC: F4 1S AIO FC

Motors: 1102 13500KV Motors

Props: Gemfan 65mm 2-blade props(1.5mm shaft hole) 

Camera: C01 Camera

VTX: Integrates 25mW VTX

Frame: HX100 SE Carbon Fiber Frame

Canopy: Canopy for HX100 SE

Receiver Option: Frsky XM / DSMX / Futaba S-FHSS 

Battery: BT2.0 300mAh 1S Battery

Flight time: 4 mins in a smooth outdoor flight, 2:30 mins in full throttle outdoor flight

BT2.0 Connector

BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag. 

Flight Controller

F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! 

F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+ and Spectrum DSMX etc. 

In this quad, the Frsky & Futaba Version is equipped with F4 1S AIO FC(SPI Rx), and the TBS & PNP Version is equipped with F4 1S AIO FC(No Rx) with an external Receiver.

C01 Camera

C01 Camera is the lightweight camera customized for the weight-sensitive micro whoop drones, perfectly fits the Meteor65. Adapted a 1/4'' CMOS sensor, 2.1mm lens for  800TVL resolution and excellent latency while minimizing the weight to 1.4g. Packed with the micro canopy, protect your camera well in a hard crash. 

The Quad comes with a 25° and 35° camera tilt

mounts, the 35° mount is suitable for high-speed flight, while the 25° mount

is for lower speed flight. SmartAudio is supported.

Motor

Customized 1102 13500KV motor - With an ultra-lightweight of 3.01g and

ball bearing technology, the friction is reduced between the bearing

surfaces thus increasing the duration of the motor and improving its

efficiency.