BETAFPV Beta65X Brushless X BWhoop RC Quadcopter 14000KV Motor F4 AIO 2S Flight Controller Meteor65 Frame Kit RTF with Radiolink T8S 8CH 2.4G RC Remote Controller & R8FM Receiver Handle Stick Transmitter Item NO.: F37152-A

BETAFPV Beta65X Brushless X BWhoop RC Quadcopter Drone With 14000KV Motor F4 AIO 2S Flight Controller Meteor65 Frame Kit 

Bullet Point

• Small size and big power. This is what the Beta65X is! A total weight of 26g give pilots a good balance of weight and nice punch on 2S battery.
• Customized with the lightest 0802 14000KV motors, give you a extreme power no matter you fly indoor or outdoor.
• Soldered with the BT2.0 connector, which can provide a stable and powerful continuous current so that you can extend the fligth time to 3:00-4:00mins compared to the Beta65 pro 2.
• Used Meteor65 frame and adopted the stackable battery slot to cut down on the wind resistance. 
• With the high performance STM32F411 processor FC boards and betaflight_matekf411rx_4.0.0 (Development Version).

Specification

• Item:Beta65X
• Weight: 26g (without battery)
• FC: F4 AIO 2S FC
• Frame: Meteor65 Frame
• Motors: 0802 14000KV Motor 
• Props: Gemfan 31mm 4-blades props 1.0mm shaft hole
• Camera: C01 Pro Micro Camera
• VTX: 25mW VTX
• Canopy: Canopy for Micro Camera
• Batteries: 2pcs BT2.0 300mah Batteries

BT2.0 Connector

BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag. 

We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 connectors for those people who want to convert the PH2.0 connector to BT2.0 connector. 

• BT2.0 Connectors (10pcs)
• BT2.0 1S Whoop Cable Pigtail
• BT2.0-PH2.0 Adapter Cable
• BT2.0 Battery Charger and Voltage Tester 
• BT2.0 Connector 1S Lipo Charger Board
• BT2.0 450mAh 1S Battery
• BT2.0 300mAh 1S Battery
• BT2.0 260mAh 1S Battery

Flight Controller

This F4 AIO 2S FC is suitable for a lighter 1-2S whoop drone perfectly, like Beta65X，Beta65 Pro 2 or Beta75 Pro 2 etc. It integrated with a Betaflight F411 processor FC, Betaflight OSD and 1-2S 5A ESC. So the 1-2S drone could save much weight for a faster fly experience.

Camera & VTX

The C01 Pro Micro Camera is a rare FPV camera currently on the market, which adapted a 1/3'' CMOS sensor and a 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.96g. Designed specifically for those weight-sensitive drones, such as Brushed & Brushless Whoop Quad. 

The stock VTX on the 65X 2S drone is the M series 25mW VTX.

Note: the 25mW VTX is marked as M02 on the first batch. It will be changed to M01 V2 since the second batch). Compared with the original M01 VTX, the 5V pad change its position.

Motors

0802 14000KV motors using ball bearing instead of brass bushings, and PCB connector. More durable and easier to repair once disconnection. 

Meteor65 Frame

Meteor65 frame is the most popular and colorful 65mm frame in this winter.

We only need to add 0.3g 3D printed adapter and change it to a 2S 65mm frame. Still light enough and you could experience the aggressive power of 2S now.

T8S Specifications:

• Channels: 8ch

• Signal Output: SBUS/PPM/PWM 

• Mode: Mode 1 or Mode 2

• Frequency: 2.4GHz ISM band（2400MHz~2483.5MHz）

• Channel Bands width: 400KHz

• Spread Spectrum: FHSS

• Adjacent Channel rejection: >38dbm

• Transmitter Power: <100mW (20dBM

• Operating Voltage: 4.2V

• Sensitivity: -104dB

• Speed Rate：38kbps

• PWM Output: 1.0ms~2.0ms

• Control Range: 2000 meters(according to the enviroment)

• Size: 16.2*5.7*9.5cm

• Weight: 0.142kg

Radiolink T8S 8CH 2.4G RC Remote Controller with R8FM Receiver Handle Stick Transmitter  for FPV Quad Drone Airplane, for Drone Fixed Wing, Multicopter, Quad, Car and Boat

Note: Default  Mode 2(Left Throttle)://www.radiolink.com/t8szxsms

T8S overview
T8S with FHSS algorithm reduce overall signal interference. Setting simplicity, 12ms fast response for 8 channels, multiple models storage, wireless connect with Android app, USB upgrade and charging, real-time transmission, low voltage alarm, failsafe, superb ergonomics and lightweight, data copy, 5-8CH programmable mix control, outstanding range over 2000 meters. (actual control distance is according the local environment).

T8S 8ch radio controller key features:
Excellent Anti-interference: stable remote control distance 2000 meters in the air
Wireless Connection: with App Setup and USB Upgrade
Fail Safe:  Each channel can be set independently
USB Charging and Low Consumption
Multiple Models Storage: No limit model storage, applicable to fixed-wings, multicopters, RC cars and boats vehicles. Work with various receivers: R8FM

Real-time Information Transmission: T8S voltage, vehicle's voltage( voltage information transmission up to 6S), RSSI can be display on App.(Telemetry function only support works with R8F or R7FG)

How to charging T8S?
Use the Android USB cable to charge, it's takes around 40 minutes to charge full.

R8FM Receiver Specifications:

• Weight: 2.5g

• Size: 0.62*0.85*0.4in/ 1.6*2.1*1cm

• Section precision: 4096

• Working Current: 30mA(input voltage 5V)

• Working Voltage: 4.8-6V

• Control Distance: 1000m on air

• Channel: 8ch

• Signal output: SBUS,PPM

Package Included:
Beta65X PNP:
1 * Beta65X Whoop Quadcopter (2S)
1 * Spare 31mm 4-blades props (2CW+2CCW)
2 * BT2.0 300mAh 1S Lipo batteries
1 * BT2.0-PH2.0 Adapter Cable
1 * Spare Canopy
1 * Screwdriver

Radio Transmitter:
1 * T8S Radio Controller
1 * R8FM receiver
1 * usb cable
1 * Spring Accessories 
1 * T8S User Manual