Home>DIY RC Drone Accessories>Motor>Airbot DIY FPV Racing Drone Quadcopter Motor ESC Combo Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor 4pcs/set

Airbot DIY FPV Racing Drone Quadcopter Motor ESC Combo Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor 4pcs/set Item NO.: F34145-B F34145-C

Name: Airbot DIY FPV Racing Drone Quadcopter Motor ESC Combo Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor 4pcs/set
Brand: Airbot
SKU: F34145-B F34145-C
Price: 90.55 USD
Availability: SoldOut

Write a Review

US$ 90.55

US$ 106.53 Save US$ 15.98 (15% Off)

Sold Out

Product Name	Airbot DIY FPV Racing Drone Quadcopter Motor ESC Combo Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor 4pcs/set
Item NO.	F34145-B F34145-C
Weight	0.59 kg = 1.3007 lb = 20.8116 oz
Category	DIY RC Drone Accessories > Motor
Brand	Airbot
Creation Time	2019-12-07

Airbot DIY FPV Racing Drone Quadcopter Motor ESC Combo Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor 4pcs/set

Package include.:
Wraith32 ESC*4
VITE 2306.5 Brushless Motor *4
Airbot Wraith32 V2.1 BLHeli_32 32bit Brushless ESC with 1800uf cap for DIY FPV Racing Drone Quadcopter
New Version with 1800uf cap on board
BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.
BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.

So what can the increased MCU speed do?
First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.

Secondly it allows packing of more functionality.
- Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.
- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.
- Like improved direction change in bidirectional mode.
- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.
The ESCs are supplied "Naked", without wires or heat shrink, these must be purchased separately.

Features:
Build in Current sensor
On-Board RGB LED (NO MIXED Color, only R or G or B)
2-6s LIPO input
35A designed
17*34mm

Airbot VITE 2306.5 1800KV 5-6S / 2500KV 3-5S Brushless Motor for DIY RC Drone FPV Racing Multirotor Spare Parts Accessories
Specification:
Brand name: Airbot
Item name: VITE 2306.5 Brushless Motor
KV: 1800/2500
Configu-ration: 12N14P
Stator Diatmeter: 23mm
Stator Length: 6.5mm
Shaft Diameter: 4mm (Hollow)
Motor Dimension(Dia.Len): 28.6x30.15mm
Weight: 33.5g (3cm Wire)
Idle current(10)@10V(A): 1.1(1800KV) 2.1(2500KV)
No.of Cells(Lipo): 5~6S(1800KV) 3~5S(2700KV)
Max Continous Power(W)180S: 960 (1800KV)
Max Continous Power(W)15S: 950 (2500KV)
Internal Resistance: 70mΩ (1800KV)
Internal Resistance: 40mΩ (2500KV)
Max Current(30S): 40A(1800KV)
Max Current(15S): 45A (2500KV)

Max. Efficiency Current: (3-6A)>85%