Home>Consumer Electronics>Computer Accessories>Network Ethernet>ADT-Link M.2 Wifi Extension Transfer Motherboard M.2 NVMe Interface Support Wireless Network Card R45SF Riser Adapter
ADT-Link M.2 Wifi Extension Transfer Motherboard M.2 NVMe Interface Support Wireless Network Card R45SF Riser Adapter

ADT-Link M.2 Wifi Extension Transfer Motherboard M.2 NVMe Interface Support Wireless Network Card R45SF Riser Adapter Item NO.: F35409-F35421

Write a Review
US$ 33.98
US$ 36.94 Save US$ 2.96 (8% Off)
Size
3cm 5cm 10cm 15cm 20cm 25cm 30cm 35cm 40cm 50cm 60cm 80cm 100cm
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name ADT-Link M.2 Wifi Extension Transfer Motherboard M.2 NVMe Interface Support Wireless Network Card R45SF Riser Adapter
Item NO. F35409-F35421
Weight 0.09 kg = 0.1984 lb = 3.1747 oz
Category Consumer Electronics > Computer Accessories > Network Ethernet
Brand ADT-Link
Creation Time 2019-12-31

ADT-Link M.2 Wifi Extension Transfer Motherboard M.2 NVMe Interface Support Wireless Network Card R45SF Riser Adapter


Brand: ADT-Link
Colour: Black
specification:
Size: 3 5 10 15 20 25 30 35 40 50 60 70 80 100cm
Weight: 27 28 29 31 32 34 35 37 38 41 44 50 56 g
Speed bandwidth: PCIe3.0x1 gen3 8G / bps
Product function: M.2 WiFi network card is inserted into the M.2 NVMe slot of the motherboard through the adapter cable.

Feature:
1. Advantages of wires, using German patented imported wires, using Taiwan imported connectors, support PCIe 3.0 full-speed stable transfer
2. The cable length advantage can be customized from 3 cm to 1 meter. The cable sold by our store has low impedance and the cable length within 60 cm supports PCIe3.0 full speed.
3. Differential signal without via design, no parasitic capacitance and parasitic inductance signal attenuation interference problem, no CAF micro short circuit phenomenon, the product is durable
4. The product is made of high-quality materials, the PCB is precise in workmanship, the thickness of the copper material is thickened to 1 oz, the gold finger plating content is sufficient, and the gold-plated foot has good electrical conductivity, which can reduce the blue screen problem caused by the oxidation and rust resistance.
5. The wire used in the product is very durable. It is protected by a PCB gasket with a thickness of 3mm at the metal welding point, and locked with screws and hex nuts. The product is rugged, reliable, resistant to pull, anti-interference, and has no broken wires. Drop nail problem. The wire can be bent or folded without affecting the use.

6. PCB dwarfing and fat design, dwarfing will not get stuck to the graphics card, fattening and lengthening design makes the board easier to install, reducing the probability of damage.

Purchase notes:
1. Be sure to identify the direction when inserting the wire, do not insert it backwards or misaligned to prevent the device from being burned. When inserting the wire, first hold the socket of the device before inserting the wire, and avoid inserting the socket pin with too much force. It is forbidden to bend or pull within 2cm of the welding end of the wire and the circuit board.
2. Various motherboards and equipment have different signal driving capabilities and other conditions. The test results of this store are not guaranteed to be consistent with your test results. As long as an extension cable is connected, the signal will be lost.
3. The graphics card or motherboard is an electronic device that will age and oxidize over time. Connecting an extension cable will only make it more unstable. Older devices are not supported. Your device is not supported for more than three years. Do not buy.
4. Only designated by the product engineer. It is for product test use only. Please do not purchase for other purposes.

The product contains:
1xM.2 Wifi Extension Card


No related record found