Packing list:
4 * 1104 4300KV 2s Brushless Motors
1 * blades(10pairs black / 4pairs purple / 4pairs green / 4pairs blue, 4options, please choose the one you want)
4 * props guards
1 * mini PIKO BLX F3 Flight Control Tower 4 in 1 BLheIS 10A 2~3s ESC
1 * Q25 MINI VTX+CAMERA 25mw 16ch Transmitter 800tvl coms Camera
Motor details:
Motor size:
1, the motor diameter: 14.2mm;
2, the motor rotor length: 9mm;
3, the motor shaft diameter: 1.5mm;
4, the motor weight (including motor base): 5.5g;
5, the motor seat hole distance: 8.4mm;
6, the motor installation screws: 4 * M1.4 screws(NOT INCLUDED);
This motor is suitable for use in mini four-axis drones, such as Zerotech Dobby drone, DIY1-2S small four-axis, you can also be installed according to your needs in the fixed-wing small aircraft.
According to the need to use the measured parameters:
(A) 1S lithium 3.7V voltage measured data:
1, Blade: 4025,
speed: 21280 RPM, the maximum tension: 50g, the maximum current: 2.0A, the maximum power: 7.4W;
2, Blade: 5030,
speed: 16746 RPM, the maximum tension: 65g, the maximum current: 2.7A, the maximum power: 10W;
3, Blade: 6030,
speed: 7170 RPM, the maximum tension: 72g, the maximum current: 3.1A, the maximum power: 11.5W;
(B) 2S lithium 7.4V voltage measured data:
Blade: 3030
Speed: 25066 RPM, Maximum pull: 83g, Maximum current: 2.5A, Maximum power: 18.5W
ESC recommend:
XP-3a, for 1s lithium battery
Xp-7a, for 1-2S lithium battery
Prop Guards details:
Material: PC
Weight: 1.5g/Pcs
For: 9mm Mounting h
Weight:1.5g/pcs
For: 9mm Mounting pitch 1102 / 1103 / 1104 / 1105 Motor
Fit for Propellers: Below 2.5" Propellers (including 2.5 inches)
Standard M2 * 6 screws, suitable for 1-1.5mm bottom plate, such as the thickness of the Plate is greater than 1.5mm recommended to choose a longer screw for installation, please be careful not to touch the motor coil installation, It is recommended to use screw glue when installing.
Mini PIKO BLX F3 Flight Control Tower 4 in 1 BLheIS 10A 2~3s ESC Deatails:
No related record found