2 / 4 Port SuperSpeed USB 3.0 PCI-E PCI E Express Riser Card Expansion Adapter USB 3.0 HUB with SATA / 4PIN Power Connector Item NO.: -F24100-

2 / 4 Port SuperSpeed USB 3.0 PCI-E PCI E Express Riser Card Expansion Adapter USB 3.0 HUB with SATA / 4PIN Power Connector

Specification:
Complies with PCI-Express specification version 2.0
Complies with USB3.0 SuperSpeed Specification Version 1.0
Compliance with xHCI Specification Version 1.0
Master chip: Renesas uPD720201 chipset
The highest transfer rate is up to 5Gbps, which is much higher than USB2.0 480Mb/s, up to 10 times;
Compatible with USB2.0, USB1.1, USB1.0
Transmission rate: 5000/480/12/1.5Mbps
USB power output: up to 5V 2A (increased current type)
Built-in large 4PIN enhanced power interface
Support USB hot plug function
Supports Windows XP/2003/Vista/win7/win8/2003/MAC10.8 and above systems.

Product advantages:
A: The NEC master chip of the USB3.0 association is used, and is the third-generation product uPD720201 4-port master.
B: The only card on the market that can support LINUX system
C: You can work without inserting an external large 4PIN connector
D: The expansion card uses five high-performance FP solid capacitors, which greatly ensure the stability of the USB power supply.
E: Because this card is a rear 4-port, it is already too high, so the small chassis is not supported.
F: Direct cooperation with the original factory, can provide strong after-sales technical support, firmware and driver updates. Let pro-card use worry-free.
G: This card uses environmentally-friendly green, neat and beautiful layout of components, materials used are full! The firmware can be updated at any time and can be upgraded directly online.

Product Usage:
With the popularity of USB3.0, you can plug in the riser card and install the driver on the motherboard with PCI-E slot, and expand the four USB 3.0 ports! Can meet you to use 4 USB3.0 devices to copy data!

Driver installation instructions:
Open the CD-ROM folder---/NEC/D720201-2 ----  double click on the .exe file to install

Hardware requirements:
Support One PCI-E motherboard
This product is a desktop PCI-E expansion card. It requires a free PCI-E slot on the motherboard to be installed and used, but also to determine whether the slot is blocked by the graphics card, and the other PCI slot cannot be installed and used. Never plug into a PCI slot.

Package included: 
1 x USB3.0 Expansion Card
1 x CD Driver