Copy and share this link on social network or send it to your friends
CopyProduct Name | 1XHLK-PM24 PM15 5M24 10M24 10M09 AC-DC 220V to 9V15V/24V Mini Power Supply Module AC-DC Isolation Switch Power Module |
Item NO. | F37278-F37289 |
Weight | 0.1 kg = 0.2205 lb = 3.5274 oz |
Category | Consumer Electronics > Industrial Module |
Brand | HI-LINK |
Creation Time | 2020-04-13 |
1XHLK-PM24 PM15 5M24 10M24 10M09 AC-DC 220V to 9V15V/24V Mini Power Supply Module AC-DC Isolation Switch Power Module
Product Size:
HLK-PM03/PM01/PM09/PM12/PM15/PM24 size:34*20*15mm
HLK-10M03/10M05/10M09/10M12/10M15/10M24 size:46.9*27.8*21.8mm
HLK-5M03/5M05/5M09/5M12/5M24 size:38*23*18mm
HLK-2M03/2M05/2M09/2M12/2M15/2M24 size:30*16*19mm
Product Features:
1. Meet UL and CE requirements,
2. Ultra-thin, ultra-small
2. Full voltage input (90~264Vac)
3. Low ripple, low noise
4. Output overload short circuit protection
5. High efficiency and high power density
6. Product design meets EMC and safety testing requirements
7. Low power consumption, green environmental protection, no-load loss <0.1W
8.100% load aging and testing
Environmental conditions
Project name Technical indicators
Working temperature -20-+60°C
Storage temperature -40-+80°C
Relative humidity 5-95%
Heat dissipation method
Atmospheric pressure 80-106Kpa
Altitude ≤2000m
Vibration Vibration coefficient 10~500Hz, 2G10min./1cycle, 60min.each along X,Y,Z axes
Electrical characteristics
1. Input characteristics (tested at room temperature).
Project Name Technical Requirements
Rated input voltage 100-240VAc
Input voltage range 90-264VAc
Maximum input current ≤0.2A
Input surge current; ≤10A
Maximum input voltage ≤ 270VAc
Input slow start ≤ 50mS
Input low voltage efficiency Vin=110VAc, output full load ≥69%
Input high voltage efficiency Vin=220VAc, output full load ≥70%
Long-term reliability MTBF≥100,000h
No-load rated output voltage +5±0.1VDc
Full load rated output voltage +5±0.2VDc
Short-time maximum output current ≥1000mA
Long time maximum output current ≥600mA
Voltage regulation ± 0.2%
Load adjustment rate ±0.5%
Output ripple and noise (mVp-p) ≤ 50
Rated input voltage, output full load. Test with a 20MHz bandwidth oscilloscope, load side and 10uF and 0.1uF capacitors. mV
Switching machine overshoot amplitude (rated input voltage, output plus 10% load) ≤5% VO
Output overcurrent protection output 150-200% A of maximum load
Output short circuit protection Direct short circuit during normal output, automatically resume normal operation after short circuit removal
Safety features:
4.1 Product design meets UL and CE safety certification requirements.
4.2 Safety and electromagnetic compatibility
The input design is UL-certified with 0.5A insurance;
The PCB board is made of double-sided copper-clad board, and the material fire rating is 94-V0;
Safety standards in line with UL1012, EN60950, UL60950
Insulation voltage I/P-O/P: 2500VAC
Insulation resistance I/P-O/P>100M Ohms/500VDC 25°C 70% RH
Conduction and radiation in accordance with EN55011, EN55022 (CISPR22)
Electrostatic discharge IEC/EN 61000-4-2 level 4 8kV/15kV
RF radiated immunity IEC/EN 61000-4-3 See application note for details
4.3 Temperature rise safety design
At room temperature, the temperature rise of the internal surface of the power supply capacitor, main converter, etc. does not exceed 90 °C;
The surface temperature rise of the outer casing does not exceed 60 °C at most;
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found