JHEMCU FE300T 5.8G 40CH PitMode 25mW 50mW 100mW 200mW 300mW Adjustable Video Transmitter VTX 16.5X16.5mm for FPV Drones

The FE300T series image transmission is a 5.8G ISM band analog image transmission. It has the characteristics of stable output power, long transmission distance, strong power filter, and can ensure that the image is free of snowflakes and horizontal lines under the maximum throttle. The image transmission adopts the flight control OSD (TXD) signal to control the image transmission radio frequency point (IRC Tramp). You only need to connect any TXD (serial port transmission) of the flight control to the RXD (serial port reception) of the image transmission. The function of manual key switch is retained. Support PIT mode to adjust the machine.

Features:
         1. Stable output power and long transmission distance.
         2. Fast 5-speed power switching.
         3. The frequency point uses 3 LEDs to display the value and power of 40 channels.
         4. Support OSD remote tuning (IRC Tramp), support PIT mode tuning, which can only be turned on in OSD.
         5. Small size, the antenna adopts IPEX interface, which reduces the space occupied by the PCB board.
         6. Small size: 16.5mm*16.5mm, mounting hole M1.
         7. Light weight: 1.0g

Performance:
         1. Input voltage: DC 5V
         2. Input current: 300MW = 400 MA
         3. Power switching: 25MW, 50MW, 100MW, 200MW, 300MW
         4. Signal channels: 40
         5. Frequency switching: manual button / OSD (IRC Tramp) (supported at the same time)
         6. Antenna interface: IPEX
         7. Dimensions: 16.5MM*16.5MM

GND Power negative
+5V power supply positive
RXD flight control serial transmission
VIN camera video input

Packge list:
FE300T image transmission transmitter module * 1
100mm line * 4
IPEX 5.8G antenna * 1

Precautions for use
1. Note that the input voltage is within the specified range and the positive and negative poles are correct, so as not to damage the internal components;
2. If you replace the antenna, please choose an antenna with standing wave and good gain to obtain a longer transmission distance;
3. Be sure to install the antenna before powering on the image transmission;